Compaq ML370 manual Check the other error messages on, Diagnosis screen for an indication

		Diagnostics and Troubleshooting 3-45
Table 3-16
ADU Diagnostic Messages continued
Message	Description	Recommended Action
Warning bit	A monitor and performance threshold	Check the other error messages on the
detected	violation may have occurred. Status	diagnosis screen for an indication of the
	of a logical drive may not be OK.	problem.
Write memory	Data could not be written to cache	With power to system turned off, verify that the
error	memory. This typically means that	cache board is fully connected to controller.
	parity error was detected while
	writing data to cache. This could be
	caused by incomplete connection
	between cache and controller. This is
	not a data loss circumstance.

Wrong	This could mean that either the board
Accelerator	was replaced in the wrong slot or
	placed in a system that was
	previously configured with another
	board type. Included with this
	message is a message indicating the
	type of adapter sensed by ADU and a
	message indicating the type of
	adapter last configured nonvolatile
	RAM.

Check the diagnosis screen for other error messages. Run the System Configuration Utility to update the system configuration.