Compaq ML370 manual Array ProLiant, Drive storage, Detected Scsi port y, Green, this indicates a

3-18Compaq ProLiant ML370 Maintenance and Service Guide

Table 3-2

POST Error Messages continued

Error Code	Audible Beeps	Probable Source of Problem	Recommended Action
1776 - Slot x Drive	None	Temperature violation detected	Check cooling fan operation by
ArrayProLiant			placing hand over fan. Check
drive storage			internal plenum cooling fan in
enclosure problem			tower servers or storage
detected (followed by			systems. If fan is not operating,
one or more of the			check for obstructions and
following):			check all internal connector.
SCSI Port (y) Cooling			Replace unit side panel if
			removed.
fan malfunction
			If the ProLiant Storage System
detected
SCSI port (y):			power LED is amber instead of
			green, this indicates a
Overheated condition
			redundant power supply failure.
detected
			Check SCSI cables. If the
SCSI port (y) Side
			message indicates to check
panel must be closed
			SCSI cables, please verify your
to prevent
			cabling with the diagrams in the
overheating
			Integrated Smart Array
SCSI port (y)			Controller Installation Guide. If
Redundant power			the routing is correct, replace
supply malfunction			cables on the specified port
detected			until the POST message is
SCSI port (y): Wide			eliminated.
			Press F1 to resume.
SCSI transfer failed
SCSI port (y):
Interrupt signal
inoperative
(RESUME = F1 KEY)
			continued