Compaq ML370 manual Hot-Plug Scsi Hard Drive, Removing a hot-plug Scsi hard drive

Removal and Replacement Procedures 2-19

Hot-Plug SCSI Hard Drive

To remove a hot-plug SCSI hard drive:

1. Open the front bezel (tower model only). See “Front Bezel” earlier in this chapter.

2.	Press the release button and swing the lever outward from the bottom.
3.	Pull the hot-plug SCSI hard￿drive out of the bay￿￿.	21
	3

Figure 2-15. Removing a hot-plug SCSI hard drive

Reverse steps 1 through 3 to replace the hot-plug SCSI hard drive.