Compaq ML370 manual Removal and Replacement Procedures

Chapter 2

Removal and Replacement Procedures

This chapter provides subassembly/module-level removal and replacement procedures for Compaq ProLiant ML370 Servers. The ProLiant ML370 Server is available in tower and rack models. The Compaq ProLiant ML370 Maintenance and Service Guide shows the tower model. In most cases, the rack model removal and replacement procedures are slightly different from the tower model procedures. After completing all necessary removal and replacement procedures, run the diagnostics program to verify that all components operate properly.

To service Compaq ProLiant ML370 Servers, you might need the following:

■Torx T-15 screwdriver

■From the Compaq SmartStart and Support Software CD:

G System Configuration Utility

G Drive Array Advanced Diagnostics

G Diagnostics