Compaq ML370 manual System Board Switches

4-4Compaq ProLiant ML370 Maintenance and Service Guide

Switches

The Compaq ProLiant ML370 Server has two switchbanks (SW1 and SW2) located on the system board. These switches are used to set the configuration of the server. The SW1 switch is used as a system identification switch, and the setting is pre-set in the factory. Do not change these settings. Incorrectly set switches may result in damage to the server.

on

1 2 3 4 5 6

1

2

Figure 4-3. System board switches

Table 4-3

System Board Switches

Item Description

System identification switch (SW1)

￿System configuration switch (SW2)