DeWalt 50-761 Operation, Troubleshooting Guide, Starting and Stopping Dust Collector

Models: 50-761

1 16
Download 16 pages 173 b
Page 13
Image 13

OPERATION

FOR OPERATOR SAFETY, DO NOT OPERATE THE MACHINE WITH ANY DUST INTAKE HOLES UNCOVERED. THE ROTATING FAN LOCATED INSIDE THE BLOWER HOUSING IS ACCESSIBLE THROUGH THE DUST IN-TAKE PORT AND CAN BE HAZARDOUS. ALWAYS WEAR PROPER APPAREL. DO NOT

WEAR JEWELRY AND KEEP FINGERS AND ALL FOREIGN OBJECTS OUT OF THE DUST INTAKE PORT. FOLLOW THE SAFETY RULES IN THIS MANUAL.

STARTING AND STOPPING DUST COLLECTOR

1.The on/off button (A) Fig. 14 is located on the motor housing. To turn the machine “ON”, push the “START” button (A).

2.To turn the machine “OFF”, push the “STOP” button

(B).

MAKE SURE THAT THE MACHINE IS TURNED OFF BEFORE PLUGGING IN THE POWER CORD. IN THE EVENT OF A POWER

FAILURE, PUSH THE STOP BUTTON. AN ACCIDENTAL START-UP CAN CAUSE INJURY.

LOCKING SWITCH IN

THE “OFF” POSITION

IMPORTANT: When the machine is not in use, the “START” button should be locked to prevent unauthorized use, using a padlock (B) Fig. 15 with a 3/16" diameter shackle.

A

B

Fig. 14

B

Fig. 15

WHEN USING THIS DUST COLLECTOR, DO NOT PICK UP ANYTHING THAT IS BURNING, SMOLDERING OR SMOKING, SUCH AS MATCHES, CIGARETTES, OR HOT ASHES.

DO NOT USE TO VACUUM COMBUSTIBLE EXPLOSIVE MATERIALS, SUCH AS COAL, GRAIN OR OTHER FINELY DIVIDED COMBUSTIBLE MATERIAL.

DO NOT USE TO VACUUM HAZARDOUS, TOXIC, OR CARCINOGENIC MATERIALS SUCH AS ASBESTOS, PESTICIDE OR LEAD-BASED PAINT DEBRIS.

TROUBLESHOOTING GUIDE

For assistance with your tool, visit our website at www.deltamachinery.com for a list of service centers or call the DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).

13

Page 13
Image 13
DeWalt 50-761 Operation, Troubleshooting Guide, Starting and Stopping Dust Collector, Locking Switch OFF Position