Compaq ML370 manual Booting into the Operating System

3-58Compaq ProLiant ML370 Maintenance and Service Guide

Table 3-19

Compaq System Configuration Utility Pager Settings for Booting into Compaq Utilities continued

Pager Data	Example	Description
	Setting
Network	Compaq	For all Compaq standard network controllers
controller
Network host	CPQHOU	Enter the network name of the server. Use underscores instead of
name		spaces within the namefor example, Compaq_Server. If you are using
		IPX network access to the Compaq Utilities, this server name is used to
		advertise NVT host services. This server name displays in the Compaq
		Insight Manager server list when the program determines it can
		communicate using NVT. Set this name to be the same as the server
		name you assign when the host OS is running.
Network card	Slot #	Select the slot number of the network interface card you wish to use for
slot		network access to Compaq Utilities.
Network	ETHERNET_II	Select the frame type for the network. Selections include both Ethernet
frame type		and Token Ring topologies.
Network IP	xxx.xxx.xxx.xxx	Enter the IP address for this server in standard dot notation.
address		NOTE: This is not used if you select Custom for Network controller. You
		must enter the IP address in the NET.CFG file that you load into the
		Compaq system partition.
Network IP	xxx.xxx.xxx.xxx	Enter the net mask for this server in standard dot notation.
net mask		NOTE: This is not used if you select Custom for network controller. You
		must enter the IP address in the NET.CFG file that you load into the
		Compaq system partition.
Network IP	xxx.xxx.xxx.xxx	Enter the router to be used for this server in standard dot notation.
router address		NOTE: This is not used if you select Custom for network controller. You
		must enter the IP address in the NET.CFG file that you load into the
		Compaq system partition.

If you configure the server to boot into Compaq Utilities, it prepares for remote communications. You can remotely run Diagnostics software, the Inspect Utility, or the System Configuration Utility using a workstation running terminal emulation software, such as Compaq Insight Manager or PC Anywhere.

Booting into the Operating System

When you enable ASR-2 to restart into the operating system and a critical error occurs, ASR-2 logs the error in Integrated Management Log (IML) and restarts the server. The system ROM pages the designated administrator, and then executes the normal restart process.

IMPORTANT: When you enable ASR-2 to restart into the operating system, Modem Dial-In Status, Network Status, and Modem Dial-Out Status are automatically disabled. In this mode, ASR-2 can page you if a critical error occurs, but you cannot access the server, and the server cannot dial out to a remote workstation.

If the ASR-2 feature cannot restart the server within 10 attempts, it logs a critical error in the Integrated Management Log (IML), restarts the server into the Compaq Utilities, and puts the modem into auto-answer mode.