Compaq ML370 SW1 System Identification Switch Settings, SW2 System Configuration Switch Settings

Connectors, Switches, and LED Indicators 4-5

SW1 – System Identification Switch Settings

The processor configuration switchbank (SW1) is an eight-position switch that is used for processor configuration. Figure 4-3shows the position of the SW1 switchbank on the system board. Positions are reserved.

CAUTION: Do not adjust the settings of the system identification switch.

SW2 – System Configuration Switch Settings

The system configuration switchbank (SW2) is a six-position switch that is used for system configuration. Figure 4-3shows the position of SW2 on the system board and Table 4-4defines the function and shows the default switch settings for SW2.

Table 4-4

System Configuration Switch Settings (SW2)

Switch Position	Function	Tower Default	Rack Default
1	Embedded video disable	Off	Off
2	Configuration lock	Off	Off
3	Rack mount	Off	On
4	Diskette drive override	Off	Off
5	Password disable	Off	Off
6	Maintenance	Off	Off

Note: On activates the function.