Compaq ML370 manual Hard Drive Blank, Removing a hard drive blank

2-18Compaq ProLiant ML370 Maintenance and Service Guide

Hard Drive Blank

IMPORTANT: A hard drive blank must be installed in an unused hard drive slot. Failure to install a hard drive blank could result in system errors.

To remove a hard drive blank:

1. Open the front bezel (tower model only). See “Front Bezel” earlier in this chapter.

2.	Squeeze the top and bottom tabs of the blank .
3.	1	￿	￿
	Pull the blank out of the hard drive cage .

2

1

Figure 2-14. Removing a hard drive blank

Reverse steps 1 through 3 to replace a hard drive blank.