Compaq ML370 manual Array Diagnostics, Use the information provided in Array, Utility ADU, Chapter

		Diagnostics and Troubleshooting 3-3
Table 3-1
Diagnostic Tools continued
Tool	What it is	How to run it
Array Diagnostics	A Windows-based tool designed to run	Use the information provided in Array
Utility (ADU)	on all Compaq systems that support	Diagnostics Utility (ADU) later in this
	Compaq array controllers. Two main	chapter.
	functions of ADU are to collect all
	possible information about the array
	controllers in the system and generate a
	list of detected problems.
	This tool is available for all Compaq
	servers covered by this guide.
Drive Array	The predecessor to ADU, DAAD is a	For a list of Compaq servers still
Advanced	DOS-based tool for Compaq servers	supported by this tool, visit the Compaq
Diagnostics (DAAD)	with Smart Array Controllers. DAAD	website:
	collects information about the array

controllers in the system and offers a	www.compaq.com
list of detected problems.

Integrated	A log of system events, such as system
Management Log	failures or nonfatal error conditions.
	View events in the Integrated
	Management Log:
	■ On the Integrated Management
	Display
	■ From within Compaq Insight
	Manager
	■ From within Compaq Survey Utility

The Integrated Management Log requires Compaq Operating System-dependent drivers. Refer to Compaq Support Software CD for instructions on installing the appropriate drivers.

System	Utility to easily configure the hardware
Configuration Utility	installed in or connected to the server.
	Specifically, it can:
	■ Resolve resource conflicts in areas
	such as memory, port addresses,
	and interrupts (IRQs)
	■ Configure PCI boards automatically
	■ Provide switch and jumper settings
	■ Manage installation of memory,
	processor upgrades, and mass
	storage devices such as hard
	drives, tape drives, and diskette
	drives
	■ Store configuration information in
	nonvolatile memory
	■ Assist in installation of an operating
	system
	■ Assist in running diagnostic tools
	such as TEST and INSPECT

If the server has bootable CD-ROM drive, run Compaq System Configuration Utility directly from Support Software CD supplied with Smart Controller Option Kit, or SmartStart and Support Software CD supplied with server. Use the CD supplied for latest version supporting Smart Controller.

If the server does not have a bootable CD-ROM drive, create diskettes with latest version of the System Configuration Utility from Support Software CD, or SmartStart and Support Software CD.