Compaq ML370 Drives are attached properly, Drive positions Run Drive Array Advanced Cannot be

3-20Compaq ProLiant ML370 Maintenance and Service Guide

Table 3-2

POST Error Messages continued

	Error Code	Audible Beeps	Probable Source of Problem	Recommended Action
1785 - Drive Array		None	Drive array configuration not
not Configured			detected
(followed by one of
the following):
■	Run Compaq			Run the Compaq Array
	Array			Configuration Utility.
	Configuration
	Utility
■	No drives			Turn off system and check SCSI
	detected			cable connections to make sure
				drives are attached properly.
■	Drive positions			Run Drive Array Advanced
	cannot be			Diagnostics if previous positions
	changed—Run			are unknown. Then turn system
	Drive Array			power off and move drives to
	Advanced			their original positions.
	Diagnostics if
	previous
	positions are
	unknown. Then
	turn system
	power OFF and
	move drives to
	their original
	positions.
■	Configuration			To avoid data loss, turn system
	information			power off and reattach drives to
	indicates drive			the original controller.
	positions beyond
	the capability of
	this controller.
	This may be due
	to drive
	movement from
	a controller that
	supports more
	drives than the
	current
	controller.
■	Configuration			To avoid data loss, reattach
	information			drives to original controller or
	indicates drives			upgrade the controller firmware
	were configured			to the version on the original
	on a controller			controller using Option ROMPaq.
	with newer

firmware. Press F1 key to resume.

continued