Compaq ML370 manual Removable Media Drive Bay Blank, Removing a removable media drive bay blank

2-20Compaq ProLiant ML370 Maintenance and Service Guide

Removable Media Drive Bay Blank

To remove a removable media drive bay blank:

1.Open the front bezel (tower model only). See “Front Bezel” earlier in this chapter.

2.Remove the four Torx T-15 screws securing the removable media drive bay blank to the chassis .

￿	2
3. Remove the removable media drive bay blank .
		￿	1
			1

Figure 2-16. Removing a removable media drive bay blank

Reverse steps 1 through 3 to replace a removable media drive bay blank.