Miele G 663 Plus, G 863 Plus Shortly after starting a, Program, the dishwasher, Stops running

Page 38

Frequently asked questions

What if ...	Possible fault	Fix
shortly after starting a	Water intake error.	– Turn off the dishwasher.
program, the dishwasher	The "Intake / Drain"	– Open the water valve.
stops running and the	indicator flashes.	– Clean the water inlet
optic indicator flashes?		– Clean the water inlet
optic indicator flashes?		filter, see maintenance
		filter, see maintenance
		instructions.
		– The water pressure is
		less than 4.5 psi
		(0.3 bar).
		Contact a plumber.

	Drain error. Water remains	– Turn off the dishwasher.
	in the wash cabinet.	– Clean the triple filter.
	The "Intake / Drain"	See maintenance
	indicator flashes.	instructions.
		– Clean the drain pump
		and the non-return
		valve, see maintenance
		instructions.
		– Remove any kinks in
		the drain hose.
after a program has	There may be a technical	– Turn the dishwasher off.
ended, the optic	fault.	Despite the problem the
indicator and the		dishwasher can be used.
program indicators		If the indicator lights flash
flash?		again after the next
		program cycle, call the
		Miele Technical Service
		Department.
there is a knocking	The spray arm is hitting	Interrupt the program and
noise in the wash	an item in the basket.	rearrange items blocking
cabinet?		the spray arms.
there is a rattling noise?	Items are not secure in	Interrupt the program and
	the wash cabinet.	rearrange loose pieces.
there is a knocking	This may be caused by	This has no effect on the
noise in the water	the installation or the	dishwasher. If in doubt
pipes?	diameter of the pipe.	contact a plumber.

38

Image 38

Contents Operating instructions Plus Contents Contents Electrical safety InstallationUse Disposal of an appliance For dishwashers with a visible heating elementConsignes DE Sécurité Importantes Avertissement Sécurité électriqueConsignes DE Sécurité Importantes Lave-vaisselle munis d’un élément chauffant visible UtilisationMise au rebut de l’appareil Caring for the environment Energy saving washingGuide to the dishwasher Wash cabinetControl panel To close the door Before using for the first timeTo open the door Pull the handleWater softener Water hardnessFilling the salt reservoir Salt indicator Bypassing the Salt indicatorRinse aid Adding rinse aidAdjusting the dosage Rinse aid indicatorLoading the dishwasher Do not rinse dishesSilver and aluminum Items not recommended for dishwashingGlassware Cutlery tray SC units Slide out the upper basket Adjusting the upper basketUpper basket Adjustable cup racks Coffee bar Lower basket Height limitInserting an insert Lower basket insertsRemoving an insert Foldable spike insert Foldable spikesPlateguard Plus with StemGuard Tall Glassware Insert for lower basket Vase / Bottle holderBasket accessories Operating the dishwasher Adding detergentAt the end of a program Running the dishwasherWaterproof System Interrupting a program Changing a programProgram When to use Program cycle Program guideAdditional features Top SoloDelay start d To start a program before the delay start period has elapsed Frequently asked questions What if Possible fault FixProgram indicators Optic indicator flashes?Indicator Shortly after starting aDishes are not clean? Spotted? Dishes are not dryGlasses and cutlery are White residue is visibleCannot be wiped off? Glasses are dullDiscolored and film Tea or lipstick stainsMieleCare After sales serviceProgram update function PC Transport Page User Maintenance Instructions Triple filter system Cleaning and CareCleaning the filter in the wash cabinet Cleaning and Care Cleaning the spray arms Remove the lower basketCleaning the optic indicator reflector Cleaning the wash cabinetCleaning the door and door seal Cleaning the control panel Cleaning the exteriorCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Page Page Page Alterations rights reserved / G 663 / G863 Plus