Cleaning and Care
Cleaning the control panel
^Only clean the control panel with a damp cloth.
,Do not use too much water when cleaning the controls. Water could penetrate into the electronics and cause damage.
,Do not use abrasive, glass or all purpose cleaners. They will damage the surface.
Cleaning the exterior
,Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the dishwasher. They will damage the surface.
Plastic
All plastic surfaces can be cleaned with warm water and liquid dish soap applied with a soft sponge.
Wipe dry using a soft cloth.
Stainless steel
Stainless steel surfaces can be cleaned using a
To help prevent resoiling, a conditioner for stainless steel can also be used. Apply sparingly with even pressure.
Stainless steel colored controls
These controls can be cleaned with warm water and liquid dish soap.
These controls may become discolored or damaged if not cleaned regularly. Do not use a stainless steel cleaner on the knobs or buttons.
Wood
Panels made from wood should be cleaned using a soft damp cloth and an appropriate wood cleaner.
50