Miele KM6348 Problem solving guide, Problem Possible cause Remedy Hob or cooking, Zones cannot be

Page 50

Problem solving guide

With the help of the following notes, minor faults in the performance of the appliance, some of which may result from incorrect operation can be put right without contacting the Service Department.

Installation work and repairs to electrical appliances must only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Do not attempt to open the casing of the appliance. Repairs and other work by unqualified persons could be dangerous and Miele cannot be held liable for unauthorised work.

Problem

Possible cause

Remedy

The hob or cooking

The mains fuse has tripped.

Reset the trip switch in the

zones cannot be

 

mains fuse box (minimum

switched on.

 

fuse rating - see data

 

 

plate).

 

 

 

 

There may be a technical

Disconnect the appliance

 

fault.

from the electricity supply

 

 

for approx. 1 minute. To do

 

 

this:

 

 

– switch off at the isolator,

 

 

or

 

 

– disconnect the mains

 

 

fuse.

 

 

Reset the trip switch in the

 

 

mains fuse box, and switch

 

 

the appliance back on. If it

 

 

still will not switch on,

 

 

contact a qualified

 

 

electrician or the Miele Ser-

 

 

vice Department.

 

 

 

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents En GB Page Contents Contents Page Correct application Safety with children Technical safety Page Correct use Page Page Cleaning and care KM 6322 / KM Guide to the applianceModels KM 6347 / KM Control panel Sensor controlsCooking zone displays Indicator lightsTimer display Rating in watts for 230 Cooking zonesCooking KM 6322 / KM Zone Cooking KM 6347 / KM Zone Disposing of your old appliance Caring for the environmentDisposal of the packing material Before using for the first time Before using for the first timeCleaning for the first time Induction Induction principleNoises Unsuitable pans PansSuitable pans include Power level range Standard ExtendedException OperationHow the hob is operated Standard power level range To switch the hob onSetting the power level Extended power level range see Power level rangeActivating/deactivating Altering the power levelPowerFlex cooking area To deactivate Auto heat-up Auto heat-upTo activate Auto heat-up Cooking setting Minutes and seconds approx Heat-up timeBooster To switch off the Booster/TwinBooster To switch on the BoosterTo switch on the TwinBooster Level Useful tips Keeping warm functionTo set the keeping warm function Switching off the hob Switching off and residual heat indicatorsSwitching off a cooking zone Residual heat indicatorTips on saving energy To set the minute minder time TimerMinute minder To change the minute minder timeTo switch a cooking zone off automatically To use both timer functions at the same time Safety features Safety lock / System lockActivating Three-finger operation standard default setting One-finger operationDeactivating Stop and GoActivating Power level Maximum operating time in hours Safety switch-offSafety switch-off with an over-long cooking time Safety switch-off if the sensors are coveredCooling elements Overheating protectionInduction coils Cleaning and care To avoid damaging the surface of your appliance, do not useCleaning and care To set the programme To select programming modeProgramming To set the statusTo save settings To not save settingsProgramme Status Setting Programming Switched on Problem solving guideProblem Possible cause Remedy Hob or cooking Zones cannot beProblem solving guide Extended zones at Same time Hob switches off Problem Possible cause Remedy Power level 9 isIf you select power Flashes in the timerOther fault messages Problem Possible cause Remedy Sensors areFE flashes alternately With numbers Timer display Over-sensitive or doCeramic and stainless steel hob cleaner 250 ml Optional accessoriesCleaning products Cloth microfibre clothXGW Mielehome systemXKM 2100 KM Mielehome Conctivity Conctivity and Mielehome Signing on the hobSigning off the hob Safety instructions for installation Safety distances Safety distance above the applianceSafety distances to the sides and back of the hob Interim shelf Safety distances underneath the hobTop of an interim shelf is 15 mm Flush-fitted hobs Hob with frame or bevelled edge Seal between the hob and the worktop Installation notesHob with frame or bevelled edge Building-in dimensions Hob with frame or bevelled edge Connecting the mains cable to the appliance Installing the hobInstalling the hob Preparing the worktopPlease take careful note Detailed diagrams for the cut-outFlush-fitted hobs WorktopsFlush-fitted hobs Installing the hob Granite and marble worktops Solid wood, tiled and glass worktops Electrical connection Important U.KWiring diagram After sales service, data plate GuaranteePage Page Page Alteration rights reserved Nr 524 040

KM6322, KM6348, KM6347, KM6323 specifications

Miele is renowned for its high-quality kitchen appliances, and the KM6323, KM6348, KM6322, and KM6347 induction hobs are no exception. These models offer a blend of advanced technology, user-friendly design, and exceptional performance, catering to both professional chefs and home cooking enthusiasts.

The Miele KM6323 induction hob features a sleek design with four cooking zones, each equipped with powerful induction technology. This allows for precise temperature control and rapid heat-up times, making cooking efficient. With a maximum output of 3.7 kW in the booster setting for certain zones, users can boil water in a flash or achieve the perfect sear on meats. The hob also includes an intuitive touch-control interface, allowing users to easily adjust settings and monitor their cooking at a glance.

The KM6348 model builds upon these features with its additional cooking zones and added functionalities. One of its standout technologies is the Miele Connect feature, which enables users to control their induction hob remotely via a smartphone app. This allows for a smarter cooking experience, as users can pre-heat their hob or monitor their cooking from another room. Furthermore, the KM6348 includes a comprehensive safety system, including automatic shut-off and child safety locks, ensuring peace of mind in the kitchen.

The KM6322 model is perfect for those looking for a compact induction solution without sacrificing performance. With its three cooking zones, this hob is ideal for smaller kitchens or for those who cook for two. The intuitive controls make it simple to navigate different settings and features. Additionally, the KM6322 showcases Miele’s commitment to energy efficiency, which is becoming increasingly important in today's eco-conscious world.

On the other hand, the KM6347 induction hob features a seamless combination of size and power. This model includes a powerful Wok burner, perfect for Asian cuisine enthusiasts, allowing for high-temperature cooking with ease. Additionally, the KM6347 employs the Intelligent Power Management system, which balances power distribution across cooking zones, ensuring optimal cooking performance without overloading your kitchen’s electrical system.

In summary, Miele's KM6323, KM6348, KM6322, and KM6347 induction hobs offer an impressive array of features, cutting-edge technologies, and elegant designs that enhance the cooking experience. Whether you require a compact solution or a powerful multi-zone hob, Miele has an option to meet your culinary needs, promoting efficiency, safety, and versatility in the modern kitchen.
Top Page Image Contents