Miele KM6347 Problem Possible cause Remedy Sensors are, Over-sensitive or do, Not react at all

Page 53

 

 

Problem solving guide

 

 

 

 

 

 

Problem

Possible cause

Remedy

The sensors are

The sensitivity level of

Make sure that there is no direct

over-sensitive or do

the sensors has

light (from the sun or from an

not react at all.

changed.

artificial source) falling onto the

 

 

hob and that the surrounding

 

 

area is not too dark.

 

 

Make sure that there is nothing

 

 

covering the sensors or the hob.

 

 

Take any pans off the hob and

 

 

wipe away any food deposits.

 

 

Interrupt the power supply to the

 

 

hob for approx. 1 minute.

 

 

If this does not solve the

 

 

problem, please call the Miele

 

 

Service department.

 

 

 

FE flashes alternately

 

 

with numbers in the

 

 

timer display.

 

 

FE 44

 

 

The overheating

See "Overheating protection".

 

protection

 

 

mechanism has

 

 

triggered.

 

FE 47

 

 

The fan is either

Make sure it has not been

FE 48

blocked or faulty.

blocked by something like a

 

fork. Remove the cause of the

 

 

 

 

blockage. If the fault message

 

 

appears again, call the Miele

 

 

Service Department.

 

 

 

Other fault messages

There is an electronic

Interrupt the power supply to the

FE..

fault.

hob for approx. 1 minute.

 

 

If the problem persists after

 

 

reconnecting the appliance to

 

 

the power supply, please

 

 

contact the Miele Service

 

 

department.

 

 

 

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents En GB Page Contents Contents Page Correct application Safety with children Technical safety Page Correct use Page Page Cleaning and care KM 6322 / KM Guide to the applianceModels KM 6347 / KM Sensor controls Control panelCooking zone displays Indicator lightsTimer display Rating in watts for 230 Cooking zonesCooking KM 6322 / KM Zone Cooking KM 6347 / KM Zone Disposing of your old appliance Caring for the environmentDisposal of the packing material Before using for the first time Before using for the first timeCleaning for the first time Induction principle InductionNoises Unsuitable pans PansSuitable pans include Standard Extended Power level rangeException OperationHow the hob is operated Setting the power level To switch the hob onStandard power level range Extended power level range see Power level rangeActivating/deactivating Altering the power levelPowerFlex cooking area To deactivate Auto heat-up Auto heat-upTo activate Auto heat-up Heat-up time Cooking setting Minutes and seconds approxBooster To switch off the Booster/TwinBooster To switch on the BoosterTo switch on the TwinBooster Level Useful tips Keeping warm functionTo set the keeping warm function Switching off a cooking zone Switching off and residual heat indicatorsSwitching off the hob Residual heat indicatorTips on saving energy Minute minder TimerTo set the minute minder time To change the minute minder timeTo switch a cooking zone off automatically To use both timer functions at the same time Safety lock / System lock Safety featuresOne-finger operation Activating Three-finger operation standard default settingDeactivating Stop and GoActivating Safety switch-off with an over-long cooking time Safety switch-offPower level Maximum operating time in hours Safety switch-off if the sensors are coveredCooling elements Overheating protectionInduction coils To avoid damaging the surface of your appliance, do not use Cleaning and careCleaning and care Programming To select programming modeTo set the programme To set the statusTo not save settings To save settingsProgramme Status Setting Programming Problem Possible cause Remedy Hob or cooking Problem solving guideSwitched on Zones cannot beProblem solving guide If you select power Problem Possible cause Remedy Power level 9 isExtended zones at Same time Hob switches off Flashes in the timerFE flashes alternately With numbers Timer display Problem Possible cause Remedy Sensors areOther fault messages Over-sensitive or doCleaning products Optional accessoriesCeramic and stainless steel hob cleaner 250 ml Cloth microfibre clothXGW Mielehome systemXKM 2100 KM Mielehome Conctivity Signing on the hob Conctivity and MielehomeSigning off the hob Safety instructions for installation Safety distance above the appliance Safety distancesSafety distances to the sides and back of the hob Interim shelf Safety distances underneath the hobTop of an interim shelf is 15 mm Flush-fitted hobs Hob with frame or bevelled edge Seal between the hob and the worktop Installation notesHob with frame or bevelled edge Building-in dimensions Hob with frame or bevelled edge Installing the hob Installing the hobConnecting the mains cable to the appliance Preparing the worktopFlush-fitted hobs Detailed diagrams for the cut-outPlease take careful note WorktopsFlush-fitted hobs Installing the hob Granite and marble worktops Solid wood, tiled and glass worktops Important U.K Electrical connectionWiring diagram Guarantee After sales service, data platePage Page Page Alteration rights reserved Nr 524 040

KM6322, KM6348, KM6347, KM6323 specifications

Miele is renowned for its high-quality kitchen appliances, and the KM6323, KM6348, KM6322, and KM6347 induction hobs are no exception. These models offer a blend of advanced technology, user-friendly design, and exceptional performance, catering to both professional chefs and home cooking enthusiasts.

The Miele KM6323 induction hob features a sleek design with four cooking zones, each equipped with powerful induction technology. This allows for precise temperature control and rapid heat-up times, making cooking efficient. With a maximum output of 3.7 kW in the booster setting for certain zones, users can boil water in a flash or achieve the perfect sear on meats. The hob also includes an intuitive touch-control interface, allowing users to easily adjust settings and monitor their cooking at a glance.

The KM6348 model builds upon these features with its additional cooking zones and added functionalities. One of its standout technologies is the Miele Connect feature, which enables users to control their induction hob remotely via a smartphone app. This allows for a smarter cooking experience, as users can pre-heat their hob or monitor their cooking from another room. Furthermore, the KM6348 includes a comprehensive safety system, including automatic shut-off and child safety locks, ensuring peace of mind in the kitchen.

The KM6322 model is perfect for those looking for a compact induction solution without sacrificing performance. With its three cooking zones, this hob is ideal for smaller kitchens or for those who cook for two. The intuitive controls make it simple to navigate different settings and features. Additionally, the KM6322 showcases Miele’s commitment to energy efficiency, which is becoming increasingly important in today's eco-conscious world.

On the other hand, the KM6347 induction hob features a seamless combination of size and power. This model includes a powerful Wok burner, perfect for Asian cuisine enthusiasts, allowing for high-temperature cooking with ease. Additionally, the KM6347 employs the Intelligent Power Management system, which balances power distribution across cooking zones, ensuring optimal cooking performance without overloading your kitchen’s electrical system.

In summary, Miele's KM6323, KM6348, KM6322, and KM6347 induction hobs offer an impressive array of features, cutting-edge technologies, and elegant designs that enhance the cooking experience. Whether you require a compact solution or a powerful multi-zone hob, Miele has an option to meet your culinary needs, promoting efficiency, safety, and versatility in the modern kitchen.
Top Page Image Contents