Description of the appliance
KM
bControl panel
cNormal burner
dFast burner
ePan support
fRing support for the Normal burner
gBurner cap
hIgnitor
iIgnition safety control
jBurner head
kCable for connection
to electrical supply approx. 3.6 ft (1.10 m) long.
lControl for front burner
mControl for rear burner
KM
bControl panel
cNormal burner
dPan support
eRing support for the normal burner
fBurner cap
gIgnitor
hIgnition safety control
iBurner head
jFast burner
kNormal burner
lCable for connection
to electrical supply, approx. 3.6 ft (1.10 m) long
mControl for the front right burner
nControl for the rear right burner
oControl for the rear left burner
pControl for the front left burner
Data plate
Because the data plate is no longer visible once the appliance has been in- stalled, a 2nd data plate is supplied which should be placed into the space provided on page 15 of these instruc- tions.
Special accessories
Special accessories are available from your Miele Dealer or from the Miele Parts Department.
Stainless steel cover EA 80
A stainless steel cover is available for the KM
For installation of the cover, a minimum distance of 20" (510 mm) is required be- tween the countertop and wall cabinets.
Note:
The pan support must be removed be- fore lowering the stainless steel cover (EA80).
Do not install the DA
3