Miele G 5810, G 5815 manual Frequently Asked Questions, Technical faults

Page 48

Frequently Asked Questions

￿Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.

Technical faults

Problem

Possible fault

Solution

After the dishwasher

The machine is not

Insert the plug.

was turned on with

plugged in.

 

 

the ￿ button, the

The circuit breaker has

Reset the circuit breaker.

display stays off and

tripped.

See the data plate for

the "Start / Stop"

 

minimum amperage.

indicator does not

 

 

 

 

flash.

 

 

 

The dishwasher stops

The circuit breaker has

– Reset the circuit breaker.

during a program.

tripped.

 

See the data plate for

 

 

 

minimum amperage.

 

 

– If the circuit breaker trips

 

 

 

again. Contact Miele.

One of the following faults appears on the

Before fixing the fault:

display:

 

– Press the ￿ button to turn

 

 

 

the dishwasher off.

￿ Fault FXX

There may be a technical

After a few seconds:

 

fault.

– Turn the dishwasher on.

 

 

–

Select the desired

 

 

 

program.

 

 

–

Press the Start / Stop

 

 

 

button.

 

 

If the fault is indicated again,

 

 

a technical fault has

 

 

occurred.

 

 

–

Contact Miele.

￿ Waterproof

The waterproof system

– Turn off the water supply.

 

has activated.

–

Contact Miele.

48

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Operating Instructions Dishwasher 5810 G Contents Contents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingBefore using for the first time Child Safety LockTo open the door To close the doorSettings menu Display FunctionsLanguage Water hardnessFilling the salt container Refill salt message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Upper basket Foldable spikesHinged cup rack Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Dishwasher with cutlery tray Heavily soiled itemsRemovable MultiComfort insert To remove the insertTo replace the insert Glass rackVase / Bottle insert Cutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentUse Adding detergentTurning on Selecting a programStarting a program Program When to use Program sequence Program guideTime display StandbyAt the end of a program Preparing your appliance for an extended vacationInterrupting a program Changing a programAdditional options Intensive lower basketTurbo Delay start Starting a program before the Delay start has elapsed BrilliantLightSettings menu LanguageWater hardness Drying Plus Deactivate indicators Optimize standbySoak Pre-rinse Extended dryingBrightness ContrastFactory default Leaving the Settings menuTurning the demo mode on Turning the demo mode offFrequently Asked Questions Technical faultsFaults in the water intake/water drain Problem Possible fault Solution One of the followingFaults appears on General problems with the dishwasher Problem Possible fault Solution Detergent is left Dispenser at the endA program Detergent lidSounds Poor cleaning results Problem Possible fault Solution Dishes are not dry GlassesCutlery are SpottedProblem Possible fault Solution Glasses have a Brown or blueDiscoloration film Cannot be wiped off Glasses are dull Discolored filmAfter sales service PC UpdateRepairs MieleCareTransport Page User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealTriple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 053 730 G5810/G5815

G 5815, G 5810 specifications

Miele, a renowned manufacturer of high-quality home appliances, offers a range of dishwashers that embody superior engineering and design. Among these, the Miele G 5815 and G 5810 dishwashers stand out for their exceptional features and advanced technologies, catering to households that value efficiency and convenience.

The Miele G 5815 model boasts an impressive array of functionalities that enhance the dishwashing experience. One of its defining characteristics is the Multiple Wash Programs feature, which includes intensive, normal, and express cycles, allowing users to select the most suitable cleaning mode based on the type and level of soiling. The appliance also incorporates Miele's EcoTech technology that optimizes water and energy usage without compromising on cleaning performance.

In terms of design, both models showcase a sleek and sophisticated appearance, available in various finishes to complement any kitchen décor. The G 5815 features an intuitive user interface with a visual display that simplifies operation. This is complemented by the ComfortClose door design, which allows the door to remain open at any angle, offering easy loading and unloading experiences.

The G 5810, while slightly more basic than the G 5815, still retains many high-end features. It also offers Multiple Wash Programs, ensuring flexibility for different cleaning needs, but emphasizes a more budget-friendly option without sacrificing quality. The efficiency of both models is evidenced by their energy ratings, making them an eco-conscious choice for consumers looking to reduce their environmental impact.

Another prominent feature in both dishwashers is the AutoDos system, which automatically dispenses the right amount of detergent for optimal cleaning results. This technology not only simplifies the process for users but also ensures that dishes are cleaned thoroughly without waste. Miele's patented 3D MultiFlex cutlery tray provides additional versatility in loading options, allowing for easy accommodation of various utensils.

In conclusion, the Miele G 5815 and G 5810 dishwashers represent a blend of cutting-edge technology, user-friendly design, and exceptional cleaning performance. Their impressive features, including Multiple Wash Programs, EcoTech technology, and the AutoDos system, create a seamless dishwashing experience. Whether you choose the more advanced G 5815 or the economically friendly G 5810, both models are designed to meet the demands of modern households, making them a valuable addition to any kitchen.
Top Page Image Contents