Miele G 5815, G 5810 manual Plumbing, Connection to the water supply

Page 69

Plumbing

Connection to the water supply

￿Installation, repairs and other work by unqualified persons could be dangerous.

￿Do not drink water from the dishwasher!

–The dishwasher can heat its own water to the temperature required by the wash program. This allows for connection of the machine to either a hot (max. 140°F / 60°C) or cold water source.

For lowest energy consumption and for fastest possible wash times connect the dishwasher to a hot water source. All programs use hot water in the rinse cycles.

–To use the "Energy Saver" program, a hot water connection of minimum 115°F / 45°C and maximum 140°F / 60°C (water intake temperature) is necessary.

The higher the water intake temperature, the better the cleaning and drying results.

–The inlet hose is approximately 5 ft. (1.5 m) long.

–The water inlet hose comes equipped with an inlet hose ending with a 3/8" female compression fitting. This can be directly connected to a water supply valve or to an appropriate coupling.

If not connected directly to a water supply valve, an appropriate adapter (not included) is required.

–Water pressure: Must be between 4.5 - 145 psi (0.3 - 10 bar).

–If the water pressure if lower, a "Water Intake" notification will be shown. See "Frequently Asked Questions" for more information.

–If the water pressure is higher than shown, a pressure reducing valve must be used.

Ensure that the water connection is secure after the first use.

￿To prevent damage to the dishwasher, it must only be connected to a fully vented drainage system.

￿Do not cut the intake hose. If the hose is cut, the dishwasher will not work. There will be a water leak. If the hose is too long, coil it neatly and place it behind or under the machine.

69

Page 68 Page 70
Image 69
Page 68 Page 70
Contents Operating Instructions Dishwasher 5810 G Contents Contents Correct usage Electrical SafetyInstallation Use Disposal of an appliance Save These InstructionsGuide to the dishwasher Control panel Energy saving washing Caring for the environmentChild Safety Lock Before using for the first timeTo open the door To close the doorDisplay Functions Settings menuWater hardness LanguageFilling the salt container Refill salt message Adding rinse aid Rinse aidRinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Upper basket Foldable spikesHinged cup rack Universal support bar Jumbo cup rackAdjusting the height Adjusting the upper basket Dishwasher with cutlery tray Heavily soiled items Lower basketTo remove the insert Removable MultiComfort insertTo replace the insert Glass rackVase / Bottle insert Split cutlery tray CutleryCutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent UseTurning on Selecting a programStarting a program Program guide Program When to use Program sequenceStandby Time displayPreparing your appliance for an extended vacation At the end of a programChanging a program Interrupting a programAdditional options Intensive lower basketTurbo Delay start BrilliantLight Starting a program before the Delay start has elapsedLanguage Settings menuWater hardness Drying Plus Deactivate indicators Optimize standbySoak Extended drying Pre-rinseBrightness ContrastLeaving the Settings menu Factory defaultTurning the demo mode on Turning the demo mode offTechnical faults Frequently Asked QuestionsFaults in the water intake/water drain Problem Possible fault Solution One of the followingFaults appears on General problems with the dishwasher Dispenser at the end Problem Possible fault Solution Detergent is leftA program Detergent lidSounds Poor cleaning results Glasses Problem Possible fault Solution Dishes are not dryCutlery are SpottedBrown or blue Problem Possible fault Solution Glasses have aDiscoloration film Cannot be wiped off Glasses are dull Discolored filmPC Update After sales serviceRepairs MieleCareTransport Page User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealTriple filter system Cleaning the triple filter Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionConnection to the water supply PlumbingVenting the drainage system DrainagePage Alteration rights reserved Nr 053 730 G5810/G5815

G 5815, G 5810 specifications

Miele, a renowned manufacturer of high-quality home appliances, offers a range of dishwashers that embody superior engineering and design. Among these, the Miele G 5815 and G 5810 dishwashers stand out for their exceptional features and advanced technologies, catering to households that value efficiency and convenience.

The Miele G 5815 model boasts an impressive array of functionalities that enhance the dishwashing experience. One of its defining characteristics is the Multiple Wash Programs feature, which includes intensive, normal, and express cycles, allowing users to select the most suitable cleaning mode based on the type and level of soiling. The appliance also incorporates Miele's EcoTech technology that optimizes water and energy usage without compromising on cleaning performance.

In terms of design, both models showcase a sleek and sophisticated appearance, available in various finishes to complement any kitchen décor. The G 5815 features an intuitive user interface with a visual display that simplifies operation. This is complemented by the ComfortClose door design, which allows the door to remain open at any angle, offering easy loading and unloading experiences.

The G 5810, while slightly more basic than the G 5815, still retains many high-end features. It also offers Multiple Wash Programs, ensuring flexibility for different cleaning needs, but emphasizes a more budget-friendly option without sacrificing quality. The efficiency of both models is evidenced by their energy ratings, making them an eco-conscious choice for consumers looking to reduce their environmental impact.

Another prominent feature in both dishwashers is the AutoDos system, which automatically dispenses the right amount of detergent for optimal cleaning results. This technology not only simplifies the process for users but also ensures that dishes are cleaned thoroughly without waste. Miele's patented 3D MultiFlex cutlery tray provides additional versatility in loading options, allowing for easy accommodation of various utensils.

In conclusion, the Miele G 5815 and G 5810 dishwashers represent a blend of cutting-edge technology, user-friendly design, and exceptional cleaning performance. Their impressive features, including Multiple Wash Programs, EcoTech technology, and the AutoDos system, create a seamless dishwashing experience. Whether you choose the more advanced G 5815 or the economically friendly G 5810, both models are designed to meet the demands of modern households, making them a valuable addition to any kitchen.
Top Page Image Contents