Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service call.
,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.
Technical faults
Issue | Possible fault | Solution |
After the dishwasher was | The machine is not | Insert the plug. |
turned on with s, the | plugged in. |
|
display stays off and the | The fuse has | Reset the circuit breaker. |
"Start" indicator does not | tripped. | Make sure it is a 15 A |
flash. |
| breaker. |
The dishwasher stops | The fuse has | Reset the circuit breaker. |
during a program. | tripped. | Make sure it is a 15 A |
|
| breaker. |
The buzzer sounds. | There may be a | Turn the dishwasher off s. |
The display shows the | technical fault. | After a few seconds: |
following: |
| – Turn the dishwasher on. |
Technical fault FXX |
| |
| – Select the desired program | |
Call Technical Service |
| |
| with the program selection | |
|
| |
|
| buttons. |
|
| – Press the "Start" button. |
|
| If the problem persists, call |
|
| Technical Service. |
The buzzer sounds. | The waterproof | – Turn off the water supply. |
The display shows the | system has | – Call Miele Technical |
following: | activated. | Service. |
Fault |
|
|
Waterproof F70 |
|
|
Close water faucet |
|
|
48