Miele G 1XXX manual To programme the water hardness level

Page 14

Before using for the first time

To programme the water hardness level

Each time a button is pressed one of the indicator lights will flash and light up in the control panel. However, only the indicator lights mentioned in the following programming process stages are significant.

The programming procedure can be cancelled at any time by pressing the On/Off button s. The procedure can then be re-started from the beginning again.

^Switch the dishwasher off with the On/Off button s.

^Press the Start/Stop button in and whilst holding it in switch the dishwasher on using the On/Off button s.

Keep the Start/Stop button pressed in for at least four seconds until the "Start/Stop" indicator light comes on.

If this does not happen, start the procedure from the beginning again.

^Press the Delay start button twice.

The "Delay start" indicator will flash briefly twice at intervals.

The characters "p 1 5" will flash one after the other in the display.

This means that the water hardness level has been set at 15 °d (2.7 mmol/l) (factory setting).

The value which has been set for the water hardness is shown as a figure after the "p" in the display (see chart).

^Use the Start/Stop button to select the value which equates to your water hardness level.

Each press on the button moves you up a level. When the highest water hardness level is reached, the setting starts from the beginning again.

^Switch the dishwasher off with the On/Off button s.

14

Image 14

Contents Operating instructions For dishwashers Contents Contents Contents Description of the appliance Appliance overviewControl panel Transport InstallationCorrect usage DeliveryUse Safety with children Disposal of your old appliance Repairs and maintenanceTo avoid damage to the appliance and other materials Energy saving washing Caring for the environment Disposal of the packing material To close the door Before using for the first timeTo open the door Child safety lock Water softener To programme the water hardness level To call up the water hardness level in the display Mmol/l 4 d you do not need to add dishwasher salt Before using the appliance for the first time you requireFilling the salt reservoir Salt indicator Rinse aid Adding rinse aidRinse aid indicator Setting the rinse aid dosage Loading the dishwasher Please note Items not suitable for dishwashersWe recommend Upper basket Hinged cup rackDishwasher with cutlery tray Adjusting the upper basketPull out the upper basket Lower basket To refit it b To remove the hinged spike insertTo remove an insert a Cutlery Cutlery insert for the cutlery basket Operation DetergentAdding detergent For informationStarting a programme Switching onSelecting a programme Display Programme sequence indicatorsSwitching off At the end of a programmeChanging a programme Unloading the dishwasherInterrupting a programme Additional functions Tab functionDelay start How the Delay start time is shown in the display Factory default setting Adjust sensor wash Cleaning the door and the door seal Cleaning and careCleaning the wash cabinet Cleaning the door frontCleaning the control panel Cleaning the filters in the wash cabinet Cleaning and care Cleaning the spray arms Remove the lower basketProblem solving guide Technical problemsFault code FXX shows Display Problem Possible cause Remedy Wash/RinseIndicator lights flash Even when the door isDishwasher does not fill/drain General problems Wash cabinet Problem Possible cause Remedy Knocking noiseNoises Rattling noiseUnsatisfactory washing result Not dry or are Problem Possible cause Remedy Dishes, cutleryGlasses are FleckedFilm cannot be Wiped off Glassware is dull Problem Possible cause Remedy Glassware has aBrown or blue tinge Discoloured filmCleaning the filter Problem solvingCleaning the water inlet filter RecommendationCleaning the drain pump and non-return valve Future updates PC After sales serviceFor testing institutes RepairsIf you would like to … You will need to order … Optional accessoriesTo make the most of your dishwasher Programme chart Programme When to useProgramme sequence Consumption Duration Electrical connection U.K Non-rewireable plugs BSElectrical connection Plumbing Connection to the water supplyDrainage Venting the drainage systemTechnical data Dishwasher modelPage Page Alteration rights reserved