![](/images/new-backgrounds/1071230/7123075x1.webp)
Additional options
Factory defaults
If you have changed any settings, you can reset them to the factory defaults.
Press the button to turn the dishwasher off.
Press and hold the Start/Stop button and simultaneously turn the dishwasher on using the button. Keep the Start/Stop button pressed for at least four seconds until the "Start/Stop" indicator light comes on.
If it does not come on, start over.
Press the Delay start button 12 times.
The Delay start indicator light shows 1 long flash and 2 short flashes in intervals.
The flashing in the time display shows whether a setting is different from the default setting.
–"p 1": all values are set to the default settings
–"p 0": at least one setting has been changed.
Press the Start/Stop button to reset the dishwasher to the default settings.
The setting is immediately saved.
Press the button to turn the dishwasher off.
38