Miele G 4275, G 4270 manual Hardwired electrical connection

Page 50

Electrical connection

Hardwired electrical connection

It is possible to hardwire this appliance to an existing power cable.

CAUTION: Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the circuit breaker.

Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards. Repairs and service by unqualified persons could be dangerous and the manufacturer cannot be held responsible.

Before connecting the appliance to the power supply, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent machine damage. Consult an electrician if in doubt.

GROUNDING INSTRUCTIONS

THIS APPLIANCE MUST BE GROUNDED.

This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance.

Prior to making a hardwire connection to the terminal, remove the power cord. Otherwise there will be a risk of electric shock from the attached plug.

An existing flexible supply cord or cable shall have a minimum thickness of AWG 14.

120 V, 60 Hz, 15 A fuse rating

Black wire (live):

connect to L

White wire (neutral): connect to N

Green wire (ground): connect to -

After attaching the permanent power supply cord, check that all screws on the terminal block and the strain relief are tightened.

50

Image 50

Contents Operating Instructions Dishwasher 4270 G Contents Contents Electrical Safety Correct usageInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingBefore using for the first time To open the door To close the doorAdding rinse aid Rinse aid indicatorRinse aid Adjusting the dosage Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Typical load for 16 place settings Adjustable cup rack Upper basketAdjusting the upper basket Lower basket To replace the insert Removable MultiComfort insertTo remove the insert Cutlery tray Cutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentUse Adding detergentStandby Turning onSelecting and starting a program Changing a program At the end of a programInterrupting a program Program When to use Program sequence Guide Program GuideAdditional options BuzzerDefault settings Frequently asked questions Technical faultsProgram start Problems with water Intake / DrainProblem Possible fault Solution Shortly after StopsGeneral problems with the dishwasher Sounds Poor cleaning results Spotted Issue Possible fault Solution Dishes are still wetGlasses and cutlery are White residue is visibleOn glasses Issue Possible fault Solution Glasses areDiscolored Film cannot be wiped Off Clouding or etching Glasses are dullRepairs After sales servicePC Update MieleCareTransport Page User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealTriple filter system Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Page Page Alteration rights reserved Nr 909 170 G4270/G4275

Related manuals

Manual 56 pages 27.13 Kb