Use
At the end of a program
Open the door a few inches to see if the program has finished.
In the "Express" program, the drying fan will run for a few minutes after the program is completed.
The indicator of the selected program has gone out.
If the program indicator is still on, the program is still running. Close the door again to allow the program to finish.
Keep the door open slightly. The dishes will cool much faster.
Unload the dishwasher.
Unloading the lower basket first will prevent water drops from the upper basket and cutlery tray (depending on model) from dropping onto dishes in the lower basket.
Turn the dishwasher off "".
The dishwasher continues to use electricity until turned off with the "" button.
If the dishwasher is not used for a longer period of time, e.g. vacationing, turn off the water supply.
Interrupting a program
A program is interrupted as soon as the door is opened. If the door is closed, the program will continue from where it was interrupted.
Open the door with care. The water in the dishwasher is hot. Danger of scalding. Before closing the door again, leave it ajar for approx. 20 secs. This will enable the temperature in the wash cabinet to settle. Close the door firmly until it clicks into place.
Changing a program
If the detergent flap is already open, do not change the program.
If a program has already started and you wish to change it:
Open the door.
Press the "" button.
Press the "" button.
Select the desired program with the program button.
Start the program by closing the door.
27