Before the first use, Clean the appliance

Before the first use

When first connecting the appliance to the power supply and after a power failure, the fan will run and a display test will be carried out for

approx. 10 seconds. The appliance cannot be used during this time.

Clean the appliance

Remove any protective wrapping.

Remove the non-slip mat and clean with a solution of warm water and liquid dish soap. Dry with a soft cloth.

Clean the warming drawer, inside and out, with a damp cloth and wipe dry.

Replace the non/slip mat once has completely dried.

Heat the appliance

Heat the warming drawer for a minimum of 2 hours.

Turn on with the "On/Off" touch control

Tap the "Menu" touch control until the symbol lights.

Tap the "Temp." touch control until the 5th indicator lights.

Tap the "Timer" touch control until 2h lights up.

Close the drawer.

The warming drawer is fitted with a self-closing device.

The drawer is also fitted with a contact switch which will only allow the heating and fan to work if the drawer is closed.

Vent the room when heating the drawer for the first time.

Metal components have a protective coating which may give off a slight odor the first time your new appliance is heated. The smell will dissipate after a short time and does not indicate a faulty connection.

The warming drawer will turn off automatically after 2 hours.