Miele ESW 47X2, ESW 48X2, ESW4082-14, ESW 4088-14 installation instructions Integrated installations

Installation

Integrated installations

Custom made front panels can be installed with models

ESW 4702 FB and ESW 4802 FB.

The custom panel must be at least 3/4" (19 mm) thick and made of heat resistant material 140 °F (60 °C). The front panel, including handle, must not exceed 11 lb (5 kg) in weight.

￿Install a handle to the custom front panel using countersunk screws.

￿Remove the screws from the left and right sides of the drawer front and carefully lift the control panel out of the drawer (see chapter "Aligning the appliance front")> Be careful not to pull or damage the power cord.

￿Remove the two screws on the inner side of the drawer and remove the panel from the appliance front.

￿Pre-drill the custom front panel (see illustration). ￿ 3/8" (10 mm), t = 3/8" (10 mm)

34