Fishman Aura manual Get Your Feet Wet, Jump In the Deep End

Page 4

Acoustic Imaging Blender Aura™

Input Requirements

•Acoustic Guitar: Use only an undersaddle pickup or a magnetic soundhole pickup.

•Other Instruments: Use only a bridge mounted pickup.

•If your pickup system has an onboard microphone, shut it off.

•If your pickup system has onboard EQ, set all the controls flat.

Quick Start

Get Your Feet Wet

1Connect the Aura’s ¼” Output or XLR Output to your amplifier or mixer input.

2Connect your acoustic instrument to the Input jack on the rear panel.

3Connect the recommended adapter to the 9VDC input to power up the Aura (see Controls and Connections, Rear Panel, 9VDC). Keep the volume down on your amplifier or mixer to avoid a loud pop that could damage your speakers (or your ears!).

4Play your instrument aggressively and adjust the Input Level until the adjacent LED (yellow) flickers regularly and the red LED does not light up at all.

5Set Edit/Play switch to Play.

6Raise the Output Level to a comfortable volume.

7Browse Through The Different Sound Image / Pickup Mixes

Use the Up and Down footswitches or the Data control to scroll through programs 01-16 and find a Sound Image/pickup mix that matches well with your instrument.

The Aura comes with 16 factory-loaded digital “Sound Images” that correspond to a popular variety of acoustic guitars and microphone combinations. To help you identify the instrument, pickup and microphone associated with each program number, see to the Quick Reference Card included with this manual.

Jump In the Deep End

Once you find a Sound Image that you would like to use with your instrument, you can correct the phase, insert the Feedback Cancel circuit, blend the Sound Image with your pickup and apply equalization or compression. The changes you select can then be applied to the programs that reside in the Play mode.

1Start with the Edit/Play switch in the Play position, and choose a Sound Image/pickup mix in one of the program locations (between 01 and 16). Make note of the program number in the display.

2Flip the Edit/Play switch to Edit. Select the Parameter you’d like to change (example; Blend) and adjust it with the Data knob. You can make adjustments to any of the 11 Parameters, as long as you stay in the Edit mode.

Once you make your adjustments, simply flip the Edit/Play switch back to Play. You now have committed these changes to that program location. Additional tweaks can also be made at any time, by returning to this same program location and repeating the above directions.

3Unless you want to start building duplicate programs in different locations, do not experiment with the Select parameter just yet. Please be patient, and read on ....

4

TIP: Always start with the Edit/Play switch in the Play position, and select your program number before you switch over to the Edit mode. This way you will avoid inadvertently altering a program that you've already set up.

RESET: If you get in too deep, too quickly, you can easily return all the programs to their original factory settings with these 3 easy steps:

1Unplug the 9VDC adapter from the back of the Aura.

2Hold down the two outside footswitches and insert the power plug into the unit.

3Continue to hold down the outside footswitches until the prompt appears in the LED display.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Acoustic Imaging Blender Aura Acoustic Imaging Blender Aura Table of Contents Get Your Feet Wet Jump In the Deep EndWelcome What Is a Sound Image?Please fill out the Product Registration form online at Aura Capabilities What does it do?What you can expect from the Aura? Size MattersMidi Requirements Aura, the Internet and YouAura Custom Shop Rear Panel Front Panel Chapter Five Basic Control Groups Feedback Cancel seeInput/Output see Factory Default Settings LED DisplayEffect on/off Switch Edit/Play SwitchData Knob Inner Workings Phase Switches Why a Global Phase Switch?Input /Output Input Level and LEDsPlay Mode How to use the Phase switchesEdit/Play Switch Why a Phase Switch on the Parameter Knob?Resetting the Aura to Factory Specs Pre-select Change ModeEffect on/off Switch Setup Edit ModeData Knob Guidelines for Selecting a Sound Image Parameter KnobSelect We recommend sizing a Sound Image to fit your instrumentBlend Aura EqualizationPickup Equalization Phase Switches Compressor LevelCompression Chords and Rhythm Compression Lead, Flatpicking and Finger styleTuner Tuner SetupMute Defeat Feedback Cancel Factory Default Feedback CancelOn the Fly Feedback Cancel Play Mode Programmable Feedback Cancel Edit ModeSetting Up for Performance Setting Up for Performance Understanding Aura NavigationSetting Up a Mix Suggestions for Mixes Build Your Own Programs for Performance Specifications BoostGlossary Troubleshooting Factory Default Settings Factory DefaultsPrograms 17 through Pickup appears in the Aura channelPlay Mode Factory Sound Image/Pickup MixesPrograms Limited Warranty To obtain factory service

Aura specifications

The Fishman Aura is a cutting-edge acoustic imaging system that revolutionizes the way musicians connect with their instruments. Designed to enhance the acoustic guitar experience, it offers an unparalleled level of sound quality and tonal versatility.

At the heart of the Fishman Aura is its unique technology, which employs advanced imaging techniques to capture the true sound characteristics of a guitar. This system allows players to achieve studio-quality sound without the need for complex microphone setups. The Aura features a selection of pre-amped images that replicate the tonal attributes of various high-end acoustic guitars, ensuring that musicians can find the perfect sound for their playing style and genre.

One of the standout features of the Fishman Aura is its easy-to-use interface. With its intuitive controls, musicians can quickly select between numerous guitar images, adjusting their tone to fit the context of their performance. This flexibility is particularly beneficial for singer-songwriters or performers who switch between different instruments, as it allows for swift and seamless transitions.

In addition to its imaging capabilities, the Fishman Aura incorporates high-quality preamp technology. This ensures that the signal output is not only clean and clear but also rich in dynamics, making it suitable for both live performances and studio recordings. The preamp is specifically designed to minimize feedback, a common challenge when amplifying acoustic instruments.

Another notable characteristic of the Fishman Aura is its compatibility with a variety of pickup systems. Whether you have a traditional piezo pickup or a more modern under-saddle sensor, the Aura can easily accommodate your setup. This universal compatibility further extends the versatility of the system, making it an excellent choice for any guitarist seeking to enhance their sound.

Durability is also a key consideration in the design of the Fishman Aura. Built to withstand the rigors of road use, it features a robust construction that ensures reliability in diverse performance environments. Its compact form factor makes it easy to transport, allowing musicians to take their sound anywhere.

In summary, the Fishman Aura is an innovative acoustic imaging system that elevates the performance of acoustic guitars. With its unique sound imaging technology, user-friendly controls, high-quality preamp, compatibility with various pickups, and durable design, it stands out as an essential tool for both live and studio applications. Whether you're a seasoned professional or an aspiring musician, the Fishman Aura is sure to enhance your acoustic sound experience.
Top Page Image Contents