Miele CM 5000 operating instructions Adjusting the grinder setting, To avoid damaging the grinder

Page 27

Adjusting the grinder setting

The grinder setting should be adjusted to suit the type of coffee you are using.

When the beans are ground correctly the coffee or espresso will flow evenly into the cup and have a good crema.

The coffee is ground too coarse, if

the espresso or coffee flows into the cup too quickly.

the crema is very pale and uneven. The coffee is ground too fine, if

the espresso or coffee flows into the cup very slowly.

the crema is dark brown.

To avoid damaging the grinder :

-only adjust the setting when it is in operation,

-only adjust the grinder one setting at a time.

-grind the coffee beans again if you would like to adjust the grinder to the next finer setting.

^Place a suitable container under the coffee dispensers.

^Open the lid on the right hand side of the coffee system.

^ Select ￿ or ￿.

^Turn the rotary selector for the grinder counter-clockwise for a finer grind or clockwise for a coarser grind.

The new grinder setting will not take effect until after the second coffee has been prepared.

27

Image 27
Contents Operating Instructions Freestanding coffee machine CM Contents Evaporating the coffee system Children Proper useTechnical safety Safety Quick Guide Guide to the machine Control Action Function Display and controlsAccessories Turning on Setting the languageFirst steps to use Before the first useSetting the clock Setting the time of dayWater hardness Level 3 hard Setting the water hardnessLevel 1 soft Level 2 moderateFilling the water tank Filling the coffee bean container Turning off Turning the machine On / OffPre-heating cups Preparing two portions at one time Preparing coffee or espressoAdjusting the height of the coffee dispensers Canceling preparationAdding ground coffee Making coffee or espresso using ground coffeePreparing coffee/espresso using ground coffee Preparing the milk flask Frothing and heating milkPreparing milk froth After preparing milk Preparing hot milkPreparing a Latte Macchiato Milk temperatureMilk froth consistency Preparing a cappuccinoPreparing hot water To avoid damaging the grinder Adjusting the grinder settingAdjusting the strength of the coffee To turn the pre-brewing function on or off Pre-brewing the coffeeTo set the coffee/espresso temperature Brewing temperatureProgramming the amount using the or buttons Setting the serving sizeProgramming the amount using the Settings menu How to Action Settings MenuOptions menu Option Available settingsLanguage Setting the time of day Time of day and clock displayClock format Timer Setting the timerSwitch on at Switch off after Switch off atTo activate and deactivate the timer Default settings Operating modes To select the operating modeSystem lock Activating / Deactivating the system lockTemporarily deactivating the system lock Displaying information Cleaning and care How often Necessary cleaningWash by hand only Dishwasher safe Turning the automatic rinsing On / Off Rinsing the systemRinsing the system manually Rinsing the cappuccinatore CappuccinatoreWater tank Milk flaskDrip tray and waste container Drip tray coverWaste container Drip trayCoffee bean container Cleaning the brew unitDo not move the brew unit handle Cleaning/Degreasing the brew unit Avoid the following on all surfaces ExteriorDescaling Selecting Descale via the Maintenance menu Energy saving mode Eco-ModeTurning off Transport Evaporating the coffee systemPacking Fault Frequently Asked QuestionsFault messages appear in the display Fault 1, Fault 80 or FaultOpen the Valve Frequently Asked Questions Preparation / dispensing problems Espresso or coffee flows into the cup too quicklyEspresso or coffee flows too slowly into the cup Crema on the coffee or espresso is not right Coffee or espresso is not hot enoughGeneral problems Water has stopped flowing when programming the amountThere is a lot of coffee water in the waste container Coffee system turns off suddenly Grinder control will not move Grinder is louder than usualLoud noised are heard during the descaling program Descaling program was started accidentlyRepairs After sales serviceInstallation instructions Caring for the environment Disposal of packing materialDisposal of an old appliance Electrical connection Installation Dimensions Page Page Alteration rights reserved Nr 995 281
Related manuals
Manual 76 pages 54.63 Kb