Miele CM 5000 operating instructions Descaling program was started accidently

Page 67

Frequently Asked Questions

The descaling program was started accidently.

The descaling program cannot be canceled once the OK button has been pressed.

This is a safety measure to ensure that the machine is fully descaled. It is important for the long-term protection of the machine and to ensure that it functions properly.

^Complete the descaling program (see "Descaling".)

Loud noised are heard during the descaling program.

This is not a fault.

These noises occur when water is flushed through the machine at a high pressure.

The heating-up time is longer than ususal, the amount of water being dispensed is not right and the coffee machine is not performing correctly.

The coffee system needs to be descaled.

^Descaling the coffee system (see, "Descaling").

Water is being sprayed above or is running out of the top of the cappuccinatore.

The cappuccinatore and steam tube are not connected securely.

^Remove the cappuccinatore by pulling it downwards.

^Turn the connecting piece very firmly onto the steam pipe.

^Push the cappuccinatore back onto the steam and water spout from below.

Milk is dripping from the cappuccinatore even though you are through dispensing milk.

The level of milk in the milk container is higher than the cappuccinatore.

^Turn the cappuccinatore dial to the ￿ position.

67

Image 67
Contents Operating Instructions Freestanding coffee machine CM Contents Evaporating the coffee system Children Proper useTechnical safety Safety Quick Guide Guide to the machine Control Action Function Display and controlsAccessories Turning on Setting the languageFirst steps to use Before the first useSetting the time of day Setting the clockWater hardness Level 3 hard Setting the water hardnessLevel 1 soft Level 2 moderateFilling the water tank Filling the coffee bean container Turning off Turning the machine On / OffPre-heating cups Preparing two portions at one time Preparing coffee or espressoAdjusting the height of the coffee dispensers Canceling preparationAdding ground coffee Making coffee or espresso using ground coffeePreparing coffee/espresso using ground coffee Preparing the milk flask Frothing and heating milkPreparing milk froth After preparing milk Preparing hot milkPreparing a Latte Macchiato Milk temperatureMilk froth consistency Preparing a cappuccinoPreparing hot water To avoid damaging the grinder Adjusting the grinder settingAdjusting the strength of the coffee To turn the pre-brewing function on or off Pre-brewing the coffeeTo set the coffee/espresso temperature Brewing temperatureProgramming the amount using the or buttons Setting the serving sizeProgramming the amount using the Settings menu How to Action Settings MenuOptions menu Option Available settingsLanguage Time of day and clock display Setting the time of dayClock format Setting the timer TimerSwitch on at Switch off after Switch off atTo activate and deactivate the timer Default settings Operating modes To select the operating modeActivating / Deactivating the system lock System lockTemporarily deactivating the system lock Displaying information How often Necessary cleaning Cleaning and careWash by hand only Dishwasher safe Turning the automatic rinsing On / Off Rinsing the systemRinsing the system manually Rinsing the cappuccinatore CappuccinatoreWater tank Milk flaskDrip tray and waste container Drip tray coverWaste container Drip trayCoffee bean container Cleaning the brew unitDo not move the brew unit handle Cleaning/Degreasing the brew unit Avoid the following on all surfaces ExteriorDescaling Selecting Descale via the Maintenance menu Eco-Mode Energy saving modeTurning off Evaporating the coffee system TransportPacking Fault Frequently Asked QuestionsFault messages appear in the display Fault 1, Fault 80 or FaultOpen the Valve Frequently Asked Questions Espresso or coffee flows into the cup too quickly Preparation / dispensing problemsEspresso or coffee flows too slowly into the cup Crema on the coffee or espresso is not right Coffee or espresso is not hot enough Water has stopped flowing when programming the amount General problems There is a lot of coffee water in the waste container Coffee system turns off suddenly Grinder control will not move Grinder is louder than usualLoud noised are heard during the descaling program Descaling program was started accidentlyRepairs After sales serviceInstallation instructions Disposal of packing material Caring for the environmentDisposal of an old appliance Electrical connection Installation Dimensions Page Page Alteration rights reserved Nr 995 281
Related manuals
Manual 76 pages 54.63 Kb