Miele KM 6318, KM 6340, KM 6342, KM 6314, KM 6317 installation instructions Technical safety

Page 14

Warning and Safety instructions

Technical safety

￿Before installation, check the appliance for visible signs of damage. Do not install and use a damaged appliance, it could be dangerous.

￿The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system which complies with local and national safety regulations. It is most important that this basic safety requirement is present and regularly tested, and where there is any doubt, the household wiring system should be inspected by a qualified electrician. The manufacturer cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).

￿Before connecting the appliance, make sure that the connection data on the data plate (voltage and frequency) match the mains electricity supply. This data must correspond in order to avoid the risk of damage to the appliance. Consult a qualified electrician if in any doubt.

￿For safety reasons, this appliance may only be used after it has been built in.

￿Never open the housing of the appliance.

Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults.

￿Installation, maintenance and repairs may only be carried out by a Miele authorised person in strict accordance with current national and local safety regulations.

Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.

￿During installation, maintenance and repair work, the appliance must be disconnected from the mains electricity supply. It is only completely isolated from the electricity supply when:

the mains fuse is disconnected, or

the screw-out fuse is removed (in countries where this is applicable), or

it is switched off at the wall socket and the plug is withdrawn from the socket, or it is switched off at the isolator.

￿If the hob is fitted with a communication module this must be disconnected from the electricity supply during installation and maintenance work and during any repair work to the hob.

￿While the appliance is under guarantee, repairs should only be undertaken by a service technician authorised by the manufacturer. Otherwise the guarantee is invalidated.

14

Image 14
Contents En GB Page Contents Safety instructions for installation Guide to the appliance ModelsKM 6317 / KM KM 6340 / KM Control panel Sensor controlsCooking zone displays Indicator lampsTimer display Rating in watts for 230 Cooking zonesCooking KM 6317 / KM Zone Special feature Cooking KM 6314 / KM 6340 / KM ZoneCorrect application Safety with children Technical safety Correct use Page Page Disposal of your old appliance Caring for the environmentDisposal of the packing material Before using for the first time Before using for the first timeCleaning for the first time Induction Induction principleNoises Unsuitable pans PansSuitable pans include Exception OperationHow the hob is operated Switching on a cooking zone, setting a power level Switching onTo switch the hob on Altering the power levelPower level range Standard ExtendedTo deactivate Auto heat-up Auto heat-upTo activate Auto heat-up Cooking setting Minutes and seconds approx Heat-up timeBooster function To switch off the Booster/TwinBooster To switch on the BoosterTo switch on the TwinBooster Level Useful tips Keeping warm functionTo set the keeping warm function Switching off the hob Switching off and residual heat indicatorsSwitching off a cooking zone Residual heat indicatorsTips on saving energy Timer Minute minder To set the minute minder time MinutesHours To change the minute minder time To delete the minute minder timeTo switch a cooking zone off automatically To use both timer functions at the same time Activating Safety featuresSafety lock / System lock DeactivatingStop and Go Power level Maximum operating time in hours Safety switch-offSafety switch-off with an over-long cooking time Safety switch-off if the sensors are coveredCooling elements Overheating protectionInduction coils Cleaning and care To avoid damaging the surface of your appliance, do not useCeramic surface To set the programme To select programming modeProgramming To set the statusTo save settings To not save settingsProgramme Status Setting ProgrammingProgramming Switched on Problem solving guideProblem Possible cause Remedy Hob or cooking Zones cannot beProblem solving guide Extended zones at Same time Hob switches off Problem Possible cause Remedy Power level 9 isIf you select power Flashes in the timerOther fault messages Problem Possible cause Remedy Sensors areFE flashes alternately With numbers Timer display Over-sensitive or do notXKM 2100 KM Optional accessoriesMielehome system InfoControlConctivity and Mielehome ConctivityMielehome Mielehome system componentsSigning on the hob Signing off the hob Safety instructions for installation Safety distance above the appliance Safety distances to the sides and back of the hob Interim shelf Safety distances underneath the hobTop of an interim shelf is 15 mm Flush-fitted hobs Hob with frame or bevelled edges Hob with frame or bevelled edges Seal between the hob and the worktopBuilding-in dimensions Building-in dimensions Building-in dimensions Building-in dimensions Building-in dimensions Installing the hob Installing the hobConnecting the mains cable to the appliance Preparing the worktopElectrical connection Important U.KElectrical connection Wiring diagram After sales service, data plate Page Page Alteration rights reserved

KM 6340, KM 6317, KM 6318, KM 6342, KM 6314 specifications

The Miele KM 6314, KM 6342, KM 6318, KM 6317, and KM 6340 are a series of high-performance induction cooktops that exemplify Miele's commitment to superior quality and cutting-edge technology. Each model offers distinct features that cater to the diverse needs of home cooks while providing a sleek and modern design.

Starting with the KM 6314, this model is designed for efficiency and precision. It boasts a total of four induction zones, with the Flex Zone allowing for flexible cooking arrangements. The PowerBoost function ensures rapid heating, perfect for those moments when time is of the essence. Miele's Clean Touch Steel finish makes it easy to maintain, ensuring that the appliance retains its elegant appearance over time.

The KM 6342 takes things a step further with additional features tailored towards advanced users. It includes Miele's innovative Pot Detection technology, which automatically adjusts cooking temperatures based on the type of cookware used. Additionally, the KM 6342 has a range of customizable settings for each cooking zone, making intricate meal preparations seamless.

For those who seek versatility, the KM 6318 incorporates Miele’s Con@ctivity technology. This feature allows the cooktop to communicate with a Miele range hood to automatically adjust fan settings based on cooking activity. This energy-efficient technology promotes a smoke-free kitchen environment while enhancing user convenience. Smart and intuitive, this cooktop is designed for modern living.

The KM 6317 stands out for its user-friendly interface, integrating a clear control panel that makes it easy to adjust settings with a simple touch. Like its counterparts, it also features Residual Heat Indicators, ensuring safe operation even after cooking is complete. The focus on safety and usability means that this model caters to cooks of all skill levels.

Finally, the KM 6340 is the premium offering in this lineup, enriched with sophisticated cooking functions such as Gentle Heat and Keep Warm settings. This model is perfect for preparing delicate dishes that require precise temperature control. The frame of the KM 6340 complements any kitchen aesthetic, while its high-quality materials reflect Miele’s standard for durability and performance.

In summary, the Miele KM series provides a range of induction cooktops, each equipped with features that enhance cooking efficiency, convenience, and safety. Whether through advanced technology like Pot Detection or Con@ctivity, or user-friendly designs, these models support culinary creativity in the contemporary kitchen.