Miele KM 6340, KM 6342, KM 6314, KM 6317, KM 6318 Electrical connection, Important U.K

Page 70

Electrical connection

All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current local and national safety regulations (BS 7671 in the UK).

Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.

A damaged cable must be replaced by a suitably qualified electrician with a special connection cable of type H 05 VV-F, available from Miele.

Ensure power is not supplied to the appliance until after installation or repair work has been carried out.

The appliance must only be operated when built-in. This is to ensure that all electrical parts are shielded. Live parts must not be exposed.

Do not connect the appliance to the mains electricity supply by an extension lead. These do not guarantee the required safety of the appliance.

Please make sure that the connection data quoted on the data plate match the household mains supply.

Connection should be made via a suitable isolator which complies with national and local safety regulations, and the On/Off switch should be easily accessible after the appliance has been built in.

If the switch is not accessible after installation (depending on country) an additional means of disconnection must be provided for all poles.

For extra safety it is advisable to protect the appliance with a residual current device (RCD). Please contact a qualified electrician for advice.

When switched off there must be an all-pole contact gap of at least 3 mm in the isolator switch (including switch, fuses and relays).

Important U.K.

The appliance is supplied for connection to a 230-240 V, 50 Hz supply with a 3-core cable.

The wires in the mains lead are coloured in accordance with the following code:

Green/yellow

= earth

Blue

= neutral

Brown

= live

WARNING

THIS APPLIANCE MUST BE

EARTHED

70

Page 69 Page 71
Image 70
Page 69 Page 71
Contents En GB Page Contents Safety instructions for installation Guide to the appliance ModelsKM 6317 / KM KM 6340 / KM Control panel Sensor controlsTimer display Indicator lampsCooking zone displays Cooking KM 6317 / KM Zone Cooking zonesRating in watts for 230 Special feature Cooking KM 6314 / KM 6340 / KM ZoneCorrect application Safety with children Technical safety Correct use Page Page Disposal of the packing material Caring for the environmentDisposal of your old appliance Cleaning for the first time Before using for the first timeBefore using for the first time Induction Induction principleNoises Suitable pans include PansUnsuitable pans How the hob is operated OperationException Switching on a cooking zone, setting a power level Switching onTo switch the hob on Altering the power levelPower level range Standard ExtendedTo activate Auto heat-up Auto heat-upTo deactivate Auto heat-up Cooking setting Minutes and seconds approx Heat-up timeBooster function To switch on the TwinBooster Level To switch on the BoosterTo switch off the Booster/TwinBooster To set the keeping warm function Keeping warm functionUseful tips Switching off the hob Switching off and residual heat indicatorsSwitching off a cooking zone Residual heat indicatorsTips on saving energy Timer Minute minder To set the minute minder time MinutesHours To change the minute minder time To delete the minute minder timeTo switch a cooking zone off automatically To use both timer functions at the same time Activating Safety featuresSafety lock / System lock DeactivatingStop and Go Power level Maximum operating time in hours Safety switch-offSafety switch-off with an over-long cooking time Safety switch-off if the sensors are coveredInduction coils Overheating protectionCooling elements Cleaning and care To avoid damaging the surface of your appliance, do not useCeramic surface To set the programme To select programming modeProgramming To set the statusTo save settings To not save settingsProgramme Status Setting ProgrammingProgramming Switched on Problem solving guideProblem Possible cause Remedy Hob or cooking Zones cannot beProblem solving guide Extended zones at Same time Hob switches off Problem Possible cause Remedy Power level 9 isIf you select power Flashes in the timerOther fault messages Problem Possible cause Remedy Sensors areFE flashes alternately With numbers Timer display Over-sensitive or do notXKM 2100 KM Optional accessoriesMielehome system InfoControlConctivity and Mielehome ConctivityMielehome Mielehome system componentsSigning on the hob Signing off the hob Safety instructions for installation Safety distance above the appliance Safety distances to the sides and back of the hob Top of an interim shelf is 15 mm Safety distances underneath the hobInterim shelf Flush-fitted hobs Hob with frame or bevelled edges Hob with frame or bevelled edges Seal between the hob and the worktopBuilding-in dimensions Building-in dimensions Building-in dimensions Building-in dimensions Building-in dimensions Installing the hob Installing the hobConnecting the mains cable to the appliance Preparing the worktopElectrical connection Important U.KElectrical connection Wiring diagram After sales service, data plate Page Page Alteration rights reserved

KM 6340, KM 6317, KM 6318, KM 6342, KM 6314 specifications

The Miele KM 6314, KM 6342, KM 6318, KM 6317, and KM 6340 are a series of high-performance induction cooktops that exemplify Miele's commitment to superior quality and cutting-edge technology. Each model offers distinct features that cater to the diverse needs of home cooks while providing a sleek and modern design.

Starting with the KM 6314, this model is designed for efficiency and precision. It boasts a total of four induction zones, with the Flex Zone allowing for flexible cooking arrangements. The PowerBoost function ensures rapid heating, perfect for those moments when time is of the essence. Miele's Clean Touch Steel finish makes it easy to maintain, ensuring that the appliance retains its elegant appearance over time.

The KM 6342 takes things a step further with additional features tailored towards advanced users. It includes Miele's innovative Pot Detection technology, which automatically adjusts cooking temperatures based on the type of cookware used. Additionally, the KM 6342 has a range of customizable settings for each cooking zone, making intricate meal preparations seamless.

For those who seek versatility, the KM 6318 incorporates Miele’s Con@ctivity technology. This feature allows the cooktop to communicate with a Miele range hood to automatically adjust fan settings based on cooking activity. This energy-efficient technology promotes a smoke-free kitchen environment while enhancing user convenience. Smart and intuitive, this cooktop is designed for modern living.

The KM 6317 stands out for its user-friendly interface, integrating a clear control panel that makes it easy to adjust settings with a simple touch. Like its counterparts, it also features Residual Heat Indicators, ensuring safe operation even after cooking is complete. The focus on safety and usability means that this model caters to cooks of all skill levels.

Finally, the KM 6340 is the premium offering in this lineup, enriched with sophisticated cooking functions such as Gentle Heat and Keep Warm settings. This model is perfect for preparing delicate dishes that require precise temperature control. The frame of the KM 6340 complements any kitchen aesthetic, while its high-quality materials reflect Miele’s standard for durability and performance.

In summary, the Miele KM series provides a range of induction cooktops, each equipped with features that enhance cooking efficiency, convenience, and safety. Whether through advanced technology like Pot Detection or Con@ctivity, or user-friendly designs, these models support culinary creativity in the contemporary kitchen.
Top Page Image Contents