Using the cooktop
Turning on and off
The control knobs are used to turn the burners on and to regulate the strength of the flames.
®Cooktop is turned off Highest flame Lowest flame
Turning on
[] To turn on the burner, press the control knob down and turn it counterclockwise to the large flame symbol. The ignitor will click and ignite the gas.
[] When the flame appears, keep the control knob pressed in for
If the flame goes out, repeat the above procedure, keeping the control knob pressed in for a few extra seconds.
[] Adjust the knob to the desired setting.
Since the outer portion of the flame is much hotter than the center, the flame should be set so that its tips do not extend beyond the sides of the pan. Flame tips which extend beyond the sides of the pan are hazardous.
Turning off
[] Turn the knob clockwise to "®".
This stops the flow of gas and turns off the burnen
flame symbol,
10