Cleaning and care

Burners

Reassembling the burner

The burners can be dismantled and cleaned when completely cool

Dismantling and cJeaning

[] Remove the burner parts and wash them in a solution of hot water and liquid dish soap.

[] Dry them thoroughly. Make sure that the flame holes are clean and

completely dry.

The shiny surfaces of the burner caps will dul! with time and usage. This is normal and will not affect the operation of the cooktop.

[] Clean the burner base, the ignitor and Ignition Safety Control with a

damp cloth and then dry with a soft cloth.

The ignitor must be thoroughly dry, or it will not spark.

Be careful not to mix up the parts. Make sure that all the locating tabs and notches align exactly.

[] Place the burner head, @, onto the burner base, ,'_,so that the Ignition Safety Control and ignitor extend through their respective holes.

[] Return the burner cap, '_@.

[] Return the grate.