Miele KM 5993, KM 5987 installation instructions Important Safety Instructions Installation

Page 46

IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION

Note to the installer:

Please leave this instruction book with the consumer for the local electrical inspector’s use.

The minimum distances given in these Installation Instructions must be observed in order to ensure safe operation. Failure to do so increases the risk of fire.

The cabinetry and venting hood should be installed first to prevent damage to the appliance.

￿To eliminate the risk of burns or fire by reaching over heated surfaces, cabinet storage space above the appliance should be avoided. If cabinet storage is necessary, the risk can be reduced by installing a venting hood to project horizontally a minimum of 5" (127 mm) beyond the front of the cabinets.

￿Make sure that the power cord to the cooktop does not come into contact with the underside of it or any mechanical parts once the cooktop has been installed.

￿The countertop must be bonded with heat resistant (212 °F/100 °C) adhesive to prevent distortion or dissolving.

Any back splashes must be heat-resistant as well.

￿The appliance must not be permanently sealed into the countertop when installed. The sealing strip under the edge of the appliance provides a sufficient seal for the countertop. See "Sealing".

￿The appliance has not been designed for maritime use or for use in mobile installations such as recreational vehicles or aircraft. However, under certain conditions it may be possible for installation in these applications. Please contact the Miele Technical Service Department with specific requirements.

￿The appliance must not be installed over a dishwasher, washer, dryer, refrigerator or freezer. Heat radiated by the appliance may damage them.

￿The appliance must not be installed above an oven not equipped with a cooling fan.

Keep this instruction book in a safe place for reference and pass it on to any future user.

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents En CA Contents Important Safety Instructions Installation Important safety instructions Proper useChildren around the appliance Technical safety Proper use Important safety instructions Important safety instructions Guide to the appliance CooktopIndicator light Sensor switchesControl panel Timer-/Memory display Cooking zone displayCooking KM 5987 / KM 5993 / KM Zone Cooking zone dataRating in Watts at 230 Before the first use First cleaningBreaking in the appliance Automatic calibration Calibrating the sensorsManual calibration Induction How induction worksNoise Size of cookware CookwareType of cookware Tips for saving energySwitching on the cooktop Sensor switchesSwitching on Switching on the cooking zoneRange of settings Settings Factory settings ExtendedAuto heat Cooking setting Minutes Seconds ApproxHeat-up time Cooking without auto heat Activate auto heatBooster function Activating Booster Deactivating BoosterHold Useful TipsSwitching off and residual heat indicators Switching off the cooktopSetting the minute minder Timer and Memory functionTimer Canceling the minute minderAutomatic cooking zone shut-off Memory function Recording a Memory programChecking the steps of Memory program Using a Memory programDeleting a Memory program Using Timer and Memory functions at the same time Activation Safety featuresSafety lock / System lock DeactivationStop and Go ActivateFor excessively long operating time Safety switch-offIf the sensors are covered Overheat protection Cleaning and care To avoid damaging the surfaces, do not use anyGlass ceramic Programming Proceed as followsProgram Status Setting ProgrammingProgramming Troubleshooting Appears in a cooking zone displayCooling fan continues to run after switch-off One of the following has occurredTechnical Service Page Installation Instructions Important Safety Instructions Installation Safety distances above the appliance Safety distances to the sides and rear of the cooktop Safety distance underneath the cooktop Top of an intermediate shelf must be 15 mmCooktops flush with the countertop Frame/Facet cooktops Installation dimensions Cooktops with frame or beveled edgesPreparing the countertop Inserting the cooktopSealing advice Tiled countertopFlush-fitted cook tops Installation Flush-fitted cook tops Solid wood or tiled worktop Electrical connection ConnectionDisposal of packing materials Help protect our environmentDisposal of an old appliance

KM 5987, KM 5993 specifications

Miele, a renowned German manufacturer known for its high-quality home appliances, has taken cooking to the next level with its KM 5987 and KM 5993 induction cooktops. These models are not just about modern aesthetics but are packed with advanced technologies and features, making them ideal for both amateur and professional chefs.

The KM 5987 and KM 5993 induction cooktops are designed with efficiency and precision in mind. Induction technology provides rapid heating and precise temperature control, allowing users to achieve the perfect cooking results. This innovative method heats pots and pans directly through electromagnetic energy, ensuring the cooktop surface remains cool and safe to touch, significantly reducing the risk of burns and ensuring easy clean-up.

One of the standout features of these cooktops is the Power Flex area. This unique design allows for flexible cooking configurations by merging two cooking zones into one larger area, accommodating larger pots or griddles. This versatility is particularly beneficial for preparing meals for family or entertaining guests.

Both models also boast Miele’s SmartSelect feature which intelligently adjusts the cook settings. Users can easily select the desired power level for each cooking zone by simply sliding their finger across the control panel. This intuitive interface enhances the cooking experience, making it easier to monitor and adjust the heat at a glance.

Another remarkable characteristic is the integrated timer function. Each cooking zone can be programmed with its own timer, allowing for synchronized cooking of multiple dishes. Once the time is up, the cooktop automatically switches off, ensuring food is cooked perfectly and preventing overheating.

Safety is also a top priority with the KM 5987 and KM 5993 models. The cooktops come equipped with features such as automatic shut-off, residual heat indicators, and child lock functions, providing peace of mind for households with children.

In terms of design, both models feature a sleek, black glass ceramic surface that not only looks elegant but is also easy to clean. The minimalist design allows these cooktops to blend seamlessly into any kitchen decor.

In summary, the Miele KM 5987 and KM 5993 induction cooktops encapsulate cutting-edge technology, safety, and user-friendly features. Perfect for any cooking enthusiast, these models are designed to enhance culinary creativity while ensuring efficiency and ease of use in the kitchen.
Top Page Image Contents