Miele KM 5993, KM 5987 installation instructions Technical safety

Page 6

Important safety instructions

Technical safety

￿Before installing the cooktop, check for externally visible damage. NEVER operate a damaged appliance. A damaged appliance can endanger your safety.

￿The electrical safety of this cooktop can only be guaranteed if proper grounding has been installed in compliance with applicable safety regulations. It is imperative that this basic safety requirement be met.

In case of doubt, have the power supply checked by a qualified electrician. The manufacturer will not be held liable for damages resulting from a missing, broken or inadequate grounding system (for example, electric shock).

￿Before connecting the cooktop, you must make sure that the electrical rating (voltage and frequency, indicated on the data plate) corresponds to the household electrical supply.

These ratings must match, in order to avoid damaging the appliance. If in doubt, please contact a qualified electrician.

￿To ensure safe operation, use the appliance only after it has been installed in place.

￿Do not under any circumstances open the cooktop housing.

Any contact with connections carrying voltage, or changes to the electrical or mechanical set-up, will endanger you and may impair the functioning of the appliance.

￿Only professionals who are duly authorized by the manufacturer should perform installation work, maintenance, and repairs on this appliance.

Work performed by unqualified persons carries the risk of serious harm to the user. The manufacturer will not be held liable for such harm.

￿Whenever performing installation or maintenance work or repairs, the appliance must be disconnected from the power supply. The appliance is considered to be electrically disconnected when one of the following conditions is met:

–The fuses or circuit breakers are tripped.

–The screw-in type fuses are fully unscrewed.

–The power cable is disconnected from the electrical system.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents En CA Contents Important Safety Instructions Installation Important safety instructions Proper useChildren around the appliance Technical safety Proper use Important safety instructions Important safety instructions Guide to the appliance CooktopSensor switches Indicator lightControl panel Timer-/Memory display Cooking zone displayCooking zone data Cooking KM 5987 / KM 5993 / KM ZoneRating in Watts at 230 First cleaning Before the first useBreaking in the appliance Calibrating the sensors Automatic calibrationManual calibration Induction How induction worksNoise Size of cookware CookwareType of cookware Tips for saving energySwitching on the cooktop Sensor switchesSwitching on Switching on the cooking zoneRange of settings Settings Factory settings ExtendedCooking setting Minutes Seconds Approx Auto heatHeat-up time Cooking without auto heat Activate auto heatBooster function Activating Booster Deactivating BoosterHold Useful TipsSwitching off and residual heat indicators Switching off the cooktopSetting the minute minder Timer and Memory functionTimer Canceling the minute minderAutomatic cooking zone shut-off Memory function Recording a Memory programUsing a Memory program Checking the steps of Memory programDeleting a Memory program Using Timer and Memory functions at the same time Activation Safety featuresSafety lock / System lock DeactivationStop and Go ActivateSafety switch-off For excessively long operating timeIf the sensors are covered Overheat protection Cleaning and care To avoid damaging the surfaces, do not use anyGlass ceramic Programming Proceed as followsProgram Status Setting ProgrammingProgramming Troubleshooting Appears in a cooking zone displayCooling fan continues to run after switch-off One of the following has occurredTechnical Service Page Installation Instructions Important Safety Instructions Installation Safety distances above the appliance Safety distances to the sides and rear of the cooktop Safety distance underneath the cooktop Top of an intermediate shelf must be 15 mmCooktops flush with the countertop Frame/Facet cooktops Installation dimensions Cooktops with frame or beveled edgesPreparing the countertop Inserting the cooktopSealing advice Tiled countertopFlush-fitted cook tops Installation Flush-fitted cook tops Solid wood or tiled worktop Electrical connection ConnectionHelp protect our environment Disposal of packing materialsDisposal of an old appliance

KM 5987, KM 5993 specifications

Miele, a renowned German manufacturer known for its high-quality home appliances, has taken cooking to the next level with its KM 5987 and KM 5993 induction cooktops. These models are not just about modern aesthetics but are packed with advanced technologies and features, making them ideal for both amateur and professional chefs.

The KM 5987 and KM 5993 induction cooktops are designed with efficiency and precision in mind. Induction technology provides rapid heating and precise temperature control, allowing users to achieve the perfect cooking results. This innovative method heats pots and pans directly through electromagnetic energy, ensuring the cooktop surface remains cool and safe to touch, significantly reducing the risk of burns and ensuring easy clean-up.

One of the standout features of these cooktops is the Power Flex area. This unique design allows for flexible cooking configurations by merging two cooking zones into one larger area, accommodating larger pots or griddles. This versatility is particularly beneficial for preparing meals for family or entertaining guests.

Both models also boast Miele’s SmartSelect feature which intelligently adjusts the cook settings. Users can easily select the desired power level for each cooking zone by simply sliding their finger across the control panel. This intuitive interface enhances the cooking experience, making it easier to monitor and adjust the heat at a glance.

Another remarkable characteristic is the integrated timer function. Each cooking zone can be programmed with its own timer, allowing for synchronized cooking of multiple dishes. Once the time is up, the cooktop automatically switches off, ensuring food is cooked perfectly and preventing overheating.

Safety is also a top priority with the KM 5987 and KM 5993 models. The cooktops come equipped with features such as automatic shut-off, residual heat indicators, and child lock functions, providing peace of mind for households with children.

In terms of design, both models feature a sleek, black glass ceramic surface that not only looks elegant but is also easy to clean. The minimalist design allows these cooktops to blend seamlessly into any kitchen decor.

In summary, the Miele KM 5987 and KM 5993 induction cooktops encapsulate cutting-edge technology, safety, and user-friendly features. Perfect for any cooking enthusiast, these models are designed to enhance culinary creativity while ensuring efficiency and ease of use in the kitchen.
Top Page Image Contents