Miele KM 5820 Cooking with Auto-heat, To activate Auto-heat, To deactivate Auto heat-up

Use

Cooking with Auto-heat

When Auto heat-up has been activated, the burner automatically turns on at the highest setting (heat-up boost) and then switches to the previously selected continued power level. The heat-up time depends on which continued power level has been chosen (see chart).

With higher continued power levels, only a relatively short heat-up time is required.

To activate Auto-heat

￿Touch the On/Off touch control for the desired burner.

The burner display flashes.

￿Touch and hold the desired continued power level number on the settings bar until a signal sounds and the Auto-heat indicator lights up.

After the heat-up time, the Auto-heat indicator will go out.

With the extended settings (see "Programming"), A flashes alternately with the continued power level until the heat-up time has finished.

Changing the continued power level deactivates Auto-heat.

To deactivate Auto heat-up

You can turn off the heat-up boost before the heat-up time has elapsed.

￿Touch the On/Off touch control for the desired burner.

The burner display flashes.

￿Touch and hold the set continued power level on the settings bar until the indicator light and A go out; or set a different power level.

Continued	Heat-up time
Power Level*	(approx.) min:sec
1	1 : 20
1.	2 : 00
2	2 : 45
2.	3 : 25
3	4 : 05
3.	4 : 45
4	5 : 30
4.	6 : 10
5	6 : 50
5.	7 : 10
6	1 : 20
6.	2 : 00
7	2 : 45
7.	2 : 45
8	2 : 45
8.	2 : 45
9	-

*The continued power level marked with a dot are only available with the extended power level settings (see "Programming").

16