Cleaning and care
Ceramic surfaces
Wipe off any soiling using a damp cloth. Stubborn soiling is best removed with a shielded scraper blade.
Apply a ceramic cleaner (available from Miele) using a soft cloth or paper towel.
To remove any limescale deposits or metallic residue apply a ceramic cleaner using a soft cloth or use a shielded scraper blade if necessary.
After cleaning wipe the ceramic surface with a damp cloth and dry.
A cleaner with a special additive to prevent water marks and smears on the ceramic surface may be used.
Any melted solids like sugar, plastic or aluminum foil should be removed as quickly as possible, while the burner is still warm. If they are allowed to harden the combiset may become pitted.
Turn the burner off.
Using a shielded scraper blade, scrape the melted item immediately off the burner while it is still hot.
Use caution: Danger of burns!
Allow the combiset to cool and clean as previously described.
Stainless steel
Clean stainless steel surfaces with warm water and liquid dish soap applied with a
Stainless steel surfaces can be cleaned using a
To help prevent resoiling, a conditioner for stainless steel can also be used. Apply sparingly with even pressure.
Do not use stainless steel cleaner on or around the printing, it may rub off. Use only a soft sponge with a mild solution of warm water and liquid dish soap to clean this area.
18