Miele CS 1122, CS 1112 installation instructions Cut out

Cut out

￿Make the countertop cut-out for the desired number of appliances according to the dimensions drawings.

Remember to maintain a minimum safety distance from the back wall, as well as from any tall unit or side wall to the left or right of the combiset.

See also the "IMPORTANT INSTALLATION SAFETY INSTRUCTIONS".

￿Seal the cut surfaces with a suitable sealant to avoid swelling caused by moisture.

The materials used must be heat resistant.

If during installation the seal around the frame does not sit flush with the countertop in the corners, the corner radius, maximum 3/16" (4 mm), can be carefully filed down to fit.