Miele CS 1011 Installing the appliance / appliances, Removing the appliance

Page 37

Installation

Installing the appliance / appliances

￿Feed the power cord down through the cut-out.

￿Place the front edge of the appliance into the cut-out.

￿With a hand on each side of the appliance press down evenly on the edges until it clicks into position. When doing so make sure that the appliance seal sits tightly on the countertop to ensure it is sealed correctly. This is important to ensure an effective seal. Do not permanently seal into the countertop.

When installing more than one appliance, a sealing strip must be inserted into the support bar.

￿Push the installed appliance to the side until the slots in the support bar are visible.

￿Insert the sealing strip ￿ into the slots in the support bar ￿.

￿Place the front edge of the next appliance into the cut-out.

￿Connect the appliance / appliances to the main power supply (see "Electrical connection").

￿Turn the appliance / appliances on and check the function.

The appliance may be lifted out using a special tool.

The appliance can also be pushed up and out from underneath. Note: push the rear out first.

Removing the appliance

If the appliance is accessible from below, it can be pushed up and out of the cut-out. Push up from the back first.

If the appliance is not accessible from below, grip the appliance with both hands at the back, pull forward, then lift it up and out.

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Operating and Installation Instructions Gas Combiset What to do if YOU Smell GAS Contents Children Correct usageTechnical safety Safety Important Safety Instructions Review Them Periodically Guide to the combiset IndicatorsBurner Cleaning the combiset Before using the combisetUse Description of the settingsFast-Ignition System Turning On/Off and RegulatingTurning off Turning on Regulating the burnersOn/Off indicator and Residual heat indicator Pan size CookwareSuitable pans Wok ringIgnition safety control Safety featuresSafety cut-off Combiset Cleaning and careReassembling the burner BurnerOn/Off indicator is flashing Possible fault Solution Frequently asked questionsFlame appears different than usual Possible fault Solution Flame goes out after being lit Possible fault SolutionFlame goes out during operation Possible fault Solution Igniter does not spark Possible fault Solution Frequently asked questionsTechnical Service MieleCare Page Installation Instructions Installation Safety distances above the appliance Recommended Safety distances to the sides of the applianceNot recommended Not allowed Safety distance from the wall covering InstallationInstallation dimensions Cut out Installation of multiple appliances Cut-out CountertopInstallation Wood or solid surface countertops Attach the spring clips and support barsGranite countertop Removing the appliance Installing the appliance / appliancesSealing Tiled surfaces Electrical connection Power supplyWiring Diagram Gas connection Gas pressure regulator Maximum output Gas type BTU/hr Nominal ratingsMinimum output Gas type BTU/hr Converting to another type of gas Disposal of packing materials Help protect our environmentDisposal of an old appliance Page

CS 1011 specifications

The Miele CS 1011 is a sophisticated steam cooking appliance that exemplifies Miele's commitment to luxury and innovative technology in the kitchen. As part of Miele's extensive range of built-in appliances, the CS 1011 brings the art of steam cooking into your home, offering a multitude of features that enhance healthy cooking and culinary creativity.

One of the standout features of the Miele CS 1011 is its large capacity, allowing users to prepare multiple dishes simultaneously. With an impressive cooking chamber that can accommodate a variety of foods, the appliance makes it easy to steam vegetables, fish, poultry, and even desserts with minimal effort. The steam cooking function ensures that foods retain their nutrients, flavors, and textures, resulting in healthier meals that are both delicious and visually appealing.

The Miele CS 1011 incorporates advanced technology that elevates the cooking experience. The innovative DirectSensor control system offers an intuitive interface that allows users to easily select cooking functions and settings. This straightforward operation is complemented by a clear display that provides real-time feedback on cooking progress and settings adjustments.

Another important aspect of the CS 1011 is its precise temperature control, which allows for consistent and reliable results. The appliance features a powerful steam generator that produces steam within moments, ensuring that cooking times are minimized without sacrificing quality. Users can choose from various cooking modes, including the ability to set the cooking time and temperature according to personal preferences or specific recipes.

The design of the Miele CS 1011 also emphasizes practicality and ease of use. A stainless steel construction adds durability and elegance, while the easy-to-clean interior simplifies maintenance. Moreover, the appliance is designed to fit seamlessly into contemporary kitchen spaces, ensuring it complements any home aesthetic.

In addition to its core steam cooking abilities, the Miele CS 1011 also offers a range of convenient features such as the automatic switch-off function, which enhances safety by preventing overcooking. The water tank is easily accessible and removable for refills, further adding to the user-friendly design.

In conclusion, the Miele CS 1011 stands out as a premier steam cooker that combines advanced cooking technology, aesthetic elegance, and practical features. With its focus on healthy cooking and precision, this appliance is sure to elevate the culinary experience in any kitchen.
Top Page Image Contents