Miele KM 417 manual Safety cut-out, Use during a power cut

Page 14

Using the gas hob

Safety cut-out

This appliance is fitted with an electric ignition safety device which cuts off the supply of gas to a burner if the flame goes out, for example if food has boiled over, or if there was a sudden draught.

^To use the hob again, turn the control clockwise until the ß position is reached and switch on as normal.

The safety cut-out operates independently from the electricity supply. This means that it is still active when the hob is used during a power cut (see "Use during a power cut").

Use during a power cut

If there is an interruption to the electricity supply the gas can be ignited with a match:

^Press in the relevant control and turn it anti-clockwise to the large gas symbol.

^Hold the control pressed in and light the gas at the burner with a match.

^Keep the control pressed in for a further 8-10 seconds and then release it.

14

Image 14

Contents Operating instructions Gas hob Contents Description of the appliance Building in and connection Correct usage Safety with children Protecting the appliance from damage Protection from burningPage Appliance faults Further safety notesDisposal of your old appliance Caring for the environmentDisposal of the packing material General notes Before using for the first timeCleaning and heating up for the first time Switching on Using the gas hobSwitching on, Switching off, Controls Switching offTop of pan in cm PansBurners Min. pan base Safety cut-out Use during a power cutCleaning and care ClothPan supports, controls Ceramic surfaceBurners Dismantle the burner as followsRe-assemble the burner as follows see illustration Gas flame goes out after being lit Problem solving guideWhat to do if Burner does not ignite after several attempts Ignitor on the burner does not sparkUnited Kingdom Connection to servicesGas connection IrelandElectrical connection Important U.KConnection to services After sales service Data plateAlteration rights reserved