Miele KM 417 manual Pan supports, controls, Ceramic surface

Page 16

Cleaning and care

Pan supports, controls

Remove the pan supports.

Clean the pan supports and the controls with a solution of hot water and a little washing up liquid applied with a soft sponge. Soak stubborn soiling first to loosen it.

Finally, wipe dry using a soft cloth.

Ceramic surface

Wipe all coarse soiling off using a damp cloth. Stubborn soiling may need to be removed with a shielded scraper blade.

Then apply a few drops of a proprietary cleaning agent for ceramic surfaces using a soft cloth or kitchen paper towel. This way any limescale deposits, caused for example by water boiling over, are removed.

Finally wipe the hob surface with a damp cloth and then dry it with a clean soft cloth.

Note that some cleaning agents contain a protective additive designed to prevent water marks and smears adhering to the surface.

16

Image 16

Contents Operating instructions Gas hob Contents Description of the appliance Building in and connection Correct usage Safety with children Protecting the appliance from damage Protection from burningPage Appliance faults Further safety notesDisposal of the packing material Caring for the environmentDisposal of your old appliance Cleaning and heating up for the first time Before using for the first timeGeneral notes Using the gas hob Switching on, Switching off, ControlsSwitching on Switching offBurners Min. pan base PansTop of pan in cm Safety cut-out Use during a power cutCleaning and care ClothPan supports, controls Ceramic surfaceBurners Dismantle the burner as followsRe-assemble the burner as follows see illustration Problem solving guide What to do if Burner does not ignite after several attemptsGas flame goes out after being lit Ignitor on the burner does not sparkConnection to services Gas connectionUnited Kingdom IrelandElectrical connection Important U.KConnection to services After sales service Data plateAlteration rights reserved