Using the cooktop
Safety feature
This gas cooktop incorporates an Ignition Safety Control which stops the supply of gas if the flame goes out.
^To reignite the burners, turn the control knob clockwise to "ß", then follow the procedures outlined in "Turning on and off".
This safety feature is not operated by electricity, it will be active even if the appliance is in use during a power failure.
Using the cooktop during a power failure
If there is an interruption to the electrical supply, the gas can be ignited using a match.
^Press down on the desired control knob and turn it counterclockwise to the large flame symbol.
^While holding down the knob, light the gas at the burner with a match.
^When the flame appears, keep the control knob pressed in for
8 - 10 seconds to allow the Ignition Safety Control to reach operating temperature.
14