Miele KM 406 manual Cleaning and care, Ceramic surface

Page 15

Cleaning and care

Do not use a steam cleaner to clean this cooktop. Pressurized steam could cause permanent damage to the surface and to components for which the manufacturer cannot accept responsibility.

Never use scouring agents, pads, abrasive cleaning agents or strong cleaners such as oven sprays, stain or rust removers. These agents could damage the surface of the appliance.

The ceramic surface can be cleaned using a cleaner for ceramic surfaces. Follow the manufacturer’s instructions.

Keep the ignitor in the burner dry. If it gets wet it will not spark.

After cleaning, the ceramic surface must be thoroughly dried with a soft cloth to prevent water marks.

Do not use any sharp pointed objects which could damage the seal between the surrounding frame and the cooktop.

Ceramic surface

The ceramic surface should be cleaned regularly, preferably after each use.

^Let your appliance cool to a safe temperature and remove the grate.

^Wipe spills using a damp cloth. Stubborn spills are best removed with a shielded scraper blade.

^Sugar and syrup spills must be cleaned before the cooktop cools completely or the glass will dimple.

^Apply a cleaner for ceramic surfaces using a soft cloth or paper towel. This will prevent any limescale deposits caused by water boiling over.

^Wipe the ceramic surface with a damp cloth and dry with a clean soft cloth.

15

Image 15
Contents Before Operating Instructions Gas CooktopWhat to do if YOU Smell GAS Contents Installation and connection Important Safety InstructionsProtection from damage Correct usagePersonal Safety Damage to the appliance Further safety notesGuide to the cooktop I jkCleaning the cooktop Before using the cooktopRegulating the burners Using the cooktopTurning on and off / Regulating Turning onTurning off Setting Description Description of the settingsSuitable pans Pan sizeUsing the cooktop during a power failure Safety featureCeramic surface Cleaning and careDismantling and cleaning BurnerReassembling the burner Igniters no longer work? Frequently asked questionsWhat if Burners do not ignite after several attempts? Flame goes out after being lit?After sales service Help protect our environment Disposal of packing materialsDisposal of an old appliance Alterations rights reserved