Fan heat
Combination mode (Microwave + Fan heat)
This combination is ideal for reheating and cooking one pot dishes e.g. casseroles. When used in combination with the microwave function (except with automatic programmes), Fan heat can be switched on either at the beginning or during cooking.
If using a metal baking tin in combination mode, do not place it on the rack as this could create sparks between the rack and the tin. Place the tin on the glass tray.
Make sure that the tin is at least 2 cm from the oven walls.
It must not touch the walls.
Rapid heat-up
If the recipe requires a
When the required temperature is reached, select the duration and also the microwave power level you require.
Selecting Fan heat at the beginning of a programme
^Use the power selector to select a microwave power level.
The h symbol lights up in the display and 0:00 flashes.
^Then press D.
The D and h symbols and 0:00 light up and the recommended temperature of 160 °C flashes in the display.
^Use the rotary selector to change the temperature if required.
^A few seconds later 0:00 will flash. The duration can now be set using the rotary selector.
Use the D button to alternate between temperature and duration.
^Once a temperature and duration have been selected press START. The D symbol will flash in the display until the temperature selected has been reached.
An audible tone will sound when the cooking programme is complete.
The microwave power level, temperature and duration can be entered in any order.
Selecting Fan heat after a programme has started
Interrupt the programme (press Stop/C once), then press D, select a temperature and start the programme again (press START).
Switching off Fan heat
Fan heat can only be switched off during cooking by cancelling the programme (press the Stop/C button twice).
38