Miele K1901SF, K1801SF, K1911SF, K1811SF installation instructions Frequently asked questions

Page 29

Frequently asked questions

With the aid of the following guide minor problems can be corrected without a ser- vice call.

Repairs should only be carried out by a qualified and trained person in strict accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage and may void the warranty.

Issue

Possible fault

Solution

The refrigerator does

The machine is not

Check whether the appliance

not get cold.

turned on.

is switched on at the main

 

 

switch. The temperature

 

 

display must be lit up.

 

 

 

 

The machine is not

Check that the plug is

 

plugged in.

correctly inserted in the power

 

 

outlet.

 

 

 

 

Check that the fuse has

Reset the circuit breaker.

 

not tripped.

 

 

 

 

 

The temperature is set

Check the display.

 

incorrectly.

 

Issue

Possible fault

Solution

The temperature in

Select a warmer

See "Selecting the correct

the refrigerator is

temperature.

temperature".

too low.

 

 

The SuperCool function

SuperCool automatically shuts

 

 

is still on.

off after 6 hours.

 

 

 

 

The door is not closed.

Check that the door has been

 

 

closed properly.

 

 

 

 

A large amount of food is

This makes the compressor

 

put in the refrigerator at

run longer, causing the

 

the same time.

temperature to fall

 

 

automatically.

29

Image 29
Contents En US, CA Contents Contents Electrical Safety Important Safety InstructionsUse InstallationDisposal of your old appliance Save These InstructionsGuide to the refrigerator Control panel Turning the appliance On/Off Before using for the first timeBefore use Using the settings SettingsFunction Display text Custom settingsTurning the button sound On/Off Turning off for longer periods of time Door alarm AlarmTemperature alarm Temperature range Setting the temperatureSetting the temperature in the refrigerator Temperature unit Fahrenheit/Celsius Using the SmartFresh drawers Storage temperaturesSmartFresh drawers HumidityFoods that are best stored under moist conditions Foods that are best stored under dry conditionsDifferent storage zones Using the refrigerator efficientlyWarmest area Coldest areaSuperCool Switching on SuperCoolSwitching off SuperCool Refrigerator and SmartFresh drawers Automatic defrostMoving the shelves Adjusting the interior fittingsDeli drawer Open the drawerSmartFresh drawer Removing the storage shelf from above the drawer Adjusting the door shelvesRemoving a door shelf Replacing a door shelfBefore cleaning Cleaning and careCleaning the interior and accessories Appliance doorRemove the SmartFresh drawer Humidity filtersAluminum frames Door seals After cleaning Ventilation slits Upper lighting Changing the light bulbSide lighting Frequently asked questions Alarm indicator is Issue Possible fault Solution Compressor kicksOn very frequently For too longClick Blubb, blubbSssrrrrr Rattling, vibratingMieleCare After sales serviceInstallation instructions Disposal of an old appliance Caring for the environmentDisposal of packing materials Empty weight of your machine InstallationInstallation site Base Installation nicheFurniture/fixtures VentilationAppliances attached together using the Merging Kit Installation optionsSingle column Side-by-sideInstallation with partition using the Merging Kit Adjusting the door opening angle optional accessoryInstallation with partition without using the Merging Kit Side panelsNiche dimensions DimensionsDoor dimensions open min Power supply18X1 SF 15 381 mm 19X1 SF 18 458 mm 18X1 SFTools needed for installation Installing the applianceOptional accessories Before you beginCheck the installation niche Before installation RemoteVision module installation Mounting Accessories Preparing the installation nicheAnti-tip brackets Securing an alternative anti-tip device Unscrew the plinth Sliding the appliance into the installation spaceAligning the appliance Attaching the appliance to Installing the applianceAttach the plinth to the appliance Attaching the toe-kick coverMounting the air separator Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel Selectable Description of function Options Status indicators Description of functionMasterCool control panel options for RemoteVision