Miele K1901SF, K1801SF, K1911SF, K1811SF installation instructions Installation, Use

Page 5

IMPORTANT SAFETY INSTRUCTIONS

Installation

This appliance is top-heavy and must be secured to prevent the possibility of tipping forward.

Keep the door closed until the appliance is completely installed and secured per the installation instructions.

~This appliance must be installed and connected in compliance with the installation instructions.

~Installation and repair work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty.

~Installation must comply with local regulations and state laws.

~Do not operate any appliance with a damaged cord or plug, or if the appliance has been damaged in any manner. Contact Miele’s Technical Ser- vice Department.

~This equipment is not designed for maritime use or for use in mobile installations such as recreational vehicles or aircraft.

~Do not install the refrigerator in a room with too low an ambient temperature, e.g., a garage, as this may lead to the appliance switching off for longer periods so that it cannot maintain the required temperature.

Use

~Persons who lack physical, sensory or mental abilities, or experience with the machine should not use it without supervision or instruction by a responsible person.

~To reduce the risk of injury, do not allow children to play in, on or near the appliance, especially in the door hinge area.

~After your refrigerator is in operation, do not touch the cold surfaces in the refrigerator compartment, particularly when hands are damp or wet. Skin may adhere to these extremely cold surfaces.

~Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

~Do not use any oils or grease on the door seal, as these will cause the seal to deteriorate and become porous with time.

~Do not block the ventilation gaps in the plinth or the top of the appliance housing unit, as this can impair the efficiency of the appliance, increase the electricity consumption and cause damage to the appliance.

~Never use a steam cleaner to clean the appliance. Pressurized steam could damage electrical components and cause a short circuit.

5

Image 5
Contents En US, CA Contents Contents Electrical Safety Important Safety InstructionsUse InstallationDisposal of your old appliance Save These InstructionsGuide to the refrigerator Control panel Turning the appliance On/Off Before using for the first timeBefore use Using the settings SettingsFunction Display text Custom settingsTurning the button sound On/Off Turning off for longer periods of time Door alarm AlarmTemperature alarm Temperature range Setting the temperatureSetting the temperature in the refrigerator Temperature unit Fahrenheit/Celsius Using the SmartFresh drawers Storage temperaturesSmartFresh drawers HumidityFoods that are best stored under moist conditions Foods that are best stored under dry conditionsDifferent storage zones Using the refrigerator efficientlyWarmest area Coldest areaSuperCool Switching on SuperCoolSwitching off SuperCool Refrigerator and SmartFresh drawers Automatic defrostMoving the shelves Adjusting the interior fittingsDeli drawer Open the drawerSmartFresh drawer Removing the storage shelf from above the drawer Adjusting the door shelvesRemoving a door shelf Replacing a door shelfBefore cleaning Cleaning and careCleaning the interior and accessories Appliance doorRemove the SmartFresh drawer Humidity filtersAluminum frames Door seals After cleaningVentilation slits Upper lighting Changing the light bulbSide lighting Frequently asked questions Alarm indicator is Issue Possible fault Solution Compressor kicksOn very frequently For too longClick Blubb, blubbSssrrrrr Rattling, vibratingMieleCare After sales serviceInstallation instructions Disposal of an old appliance Caring for the environmentDisposal of packing materials Empty weight of your machine InstallationInstallation site Base Installation nicheFurniture/fixtures VentilationAppliances attached together using the Merging Kit Installation optionsSingle column Side-by-sideInstallation with partition using the Merging Kit Adjusting the door opening angle optional accessoryInstallation with partition without using the Merging Kit Side panelsNiche dimensions DimensionsDoor dimensions open min Power supply18X1 SF 15 381 mm 19X1 SF 18 458 mm 18X1 SFTools needed for installation Installing the applianceOptional accessories Before you beginCheck the installation niche Before installation RemoteVision module installation Mounting Accessories Preparing the installation nicheAnti-tip brackets Securing an alternative anti-tip device Unscrew the plinth Sliding the appliance into the installation spaceAligning the appliance Attaching the appliance to Installing the applianceAttach the plinth to the appliance Attaching the toe-kick coverMounting the air separator Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel Selectable Description of function Options Status indicators Description of functionMasterCool control panel options for RemoteVision

K1811SF, K1911SF, K1901SF, K1801SF specifications

The Miele K1801SF, K1901SF, K1911SF, and K1811SF are premium refrigerator models that exemplify the brand's commitment to quality, performance, and innovative technology. These models are designed to meet the demands of modern kitchens while ensuring exceptional food preservation and energy efficiency.

Starting with the K1801SF, this refrigerator features a generous storage capacity, providing ample space for groceries and perishables. One of its standout features is the PerfectFresh technology, which enables optimal temperature and humidity levels in the storage compartments. This ensures that fruits and vegetables stay fresh for longer while retaining their nutritional value.

The K1901SF model takes things a step further with its NoFrost technology, which eliminates the need for manual defrosting. The freezer compartment remains frost-free, preventing ice buildup and ensuring hassle-free operation. Additionally, this model is equipped with a sophisticated electronic control system, allowing users to easily adjust temperature settings and monitor performance.

In the K1911SF model, Miele enhances convenience with its Dynamic Cooling feature. This ensures that cool air circulates evenly throughout the refrigerator, minimizing temperature fluctuations. This is particularly important for keeping perishable items at consistent temperatures, thus prolonging their freshness. The K1911SF also includes an integrated water filter, supplying clean, filtered water for drinking and ice-making purposes.

Finally, the K1811SF model combines stylish design with advanced functionality. It features LED lighting that not only illuminates the interior but also consumes less energy compared to traditional lighting solutions. The refrigerator's door alarm system is another practical feature, alerting users if the door remains open for too long, which helps maintain optimal cooling conditions.

All four models share a commitment to energy efficiency, with Miele’s engineering ensuring that they meet or exceed energy consumption standards. Each refrigerator is constructed with high-quality materials and boasts a sleek, modern aesthetic that can seamlessly fit into any kitchen design.

In summary, the Miele K1801SF, K1901SF, K1911SF, and K1811SF refrigerators stand out for their advanced technologies, including PerfectFresh and NoFrost. With their spacious interiors, efficient cooling systems, and user-friendly controls, these models are designed to cater to the needs of discerning consumers who value both performance and style in their kitchen appliances.