Cleaning and care
To reduce the risk of electrical shock, disconnect the appliance from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before maintenance.
Never use cleaning agents containing abrasive substances such as sand, soda, acids, chlorides or chemical solvents.
Stainless steel surfaces can be cleaned using a
Only use a mild solution of warm water and liquid dish soap to clean this appliance.
Do not use a steam cleaner to clean this appliance. Pressurized steam could penetrate electrical components and cause a short circuit.
Do not allow water to get into the electronic unit or lights.
The data plate located inside the appliance must not be removed. It contains information which is required in the event of a service call.
To better maintain your appliance avoid the following:
–cleaners containing soda, ammonia, thinners, or chlorides
–cleaners containing descaling agents or lime removers,
–abrasive cleaners,
–dishwasher soap (powder),
–caustic (oven) cleaners,
–scouring pads, steel wool, hard brushes,
–metal scrapers,
–eraser sponges,
–steam cleaning products.
Glass cleaners may be used to clean the exterior. However do not allow them to sit or "puddle", this can cause damage to the surface.
Remove the cleaner promptly.
25