Miele F 1901 SF, F 1811 SF Before cleaning, Cleaning the interior and accessories, Appliance door

Page 26
Before cleaning

Cleaning and care

Before cleaning

￿Use the main switch to turn the appliance off completely.

The main switch is located on the right side underneath the control panel.

￿Unplug the power cord.

￿Remove any food from the appliance and store it in a cool place.

￿Take out any removable parts, e.g., shelves.

Cleaning the interior and accessories

Use a mild solution of warm water and liquid dish soap. Wash all accessories and drawers by hand. Do not wash in a dishwasher.

￿Clean the appliance as needed.

￿After washing, wipe down the interior and accessories with a clean wet cloth, then dry with a soft cloth. Leave the appliance door open for a short time, so the moisture can evaporate.

Appliance door

￿Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner.

￿To help prevent resoiling, a conditioner for stainless steel can also be used. Apply sparingly with even pressure.

Aluminum frames

The shelf frames and the door baskets are made of aluminum.

￿Clean the frames with a mild solution of warm water and liquid dish soap.

Aluminum is susceptible to scratches and nicks, treat with care.

The aluminum frames may become discolored or otherwise altered if soiling is not cleaned away promptly.

Do not use stainless steel cleaners; lime removers; scouring pads, such as pot scrubbers; or used sponges that still contain abrasive cleanser residue to clean the frames.

26

Image 26
Contents F 1801 SF, F 1811 SF F 1901 SF, F 1911 SF Operating and Installation Instructions Freezerwith Ice Maker en - US, CAContents Contents IMPORTANT SAFETY INSTRUCTIONS Electrical SafetyInstallation Do not deactivate the water filter display SAVE THESE INSTRUCTIONS Disposal of your old applianceShelves height adjustable Ice cube maker Guide to the freezerDoor shelves height adjustable Main switch to turn the whole appliance On/OffSensor button for the temperature and door alarm Control panelAccess button activates the control panel Water filter change indicatorTurning the appliance On/Off Before using for the first timeBefore use Additional settings SettingsUsing the settings Turning the button sound On/Off Turning off for longer periods of time Door alarm Temperature and door alarmTemperature alarm Setting the temperature Setting the temperatureTemperature unit Fahrenheit/Celsius Using the freezer efficiently Freezing foodDefrosting Cooling drinks quicklySuitable packing material Freezing tipsPacking tips Unsuitable packing material SuperCool SuperCoolTurning off the ice cube maker Ice cube makerTurning on the ice cube maker Automatic defrost Moving the shelves Adjusting the interior fittingsAdjusting the door shelves Top shelfIce cube container Replacing the ice cube containerCleaning and care Remove the cleaner promptlyAppliance door Before cleaningCleaning the interior and accessories Aluminum framesDoor seals After cleaningVentilation slits Changing the light bulb Upper lightingPull the defective light bulb from the socket Restore power to the applianceSide lighting 5 W/12 V/socket GWater filter change indicator Water filterExchanging the water filter Using an external water filter Confirming the filter changeCertificate Number Water filterWater Treatment Device 06 -To a capacity of 739.68 gallons 2800 liters Performance Data Sheet For Filter ModelUsing Replacement Cartridge Flush new cartridge for 3 minutesD-33332Gütersloh Lead free certificateMiele & Cie. KG Carl-Miele-Straße29 Frequently asked questions General problems Alarm / Indicator warnings The ice cube maker Problems with the ice makerwill not switch on The ice cube maker isThe ice cubes have The ice cubes aresmall an unpleasantFrequently asked questions The appliance is making noises After sales service MieleCarePage Installation Instructions Disposal of an old appliance Caring for the environmentDisposal of packing materials Installation Installation siteImportant! When there is high humidity a build-upof condensation on the outer surfaces of the appliance can occur.This can cause the surfaces to corrode.To prevent this, it is advisable to install the appliance in a dry and/or an air-conditionedroom with sufficient ventilation.Please ensure that doors close and seal properly after installation and that the appliance is installed in accordance with these installation instructions and and with the required ventilation openings Furniture/fixtures Installation nicheBase VentilationSingle column Installation optionsStainless steel panels Side-by-sideSide panels InstallationInstallation with partition using the Merging Kit from 5/8 16 mm to 6 5/16 160 mmDimensions Door dimensions open30 762 mm Niche dimensionsNiche width A 36 915 mmWater connection Power supply and water connectionPower supply 15 381 mmOptional accessories Installing the applianceTools needed for installation Before you beginCheck the installation niche Installing the applianceAligning the housing unit Before installationRemoteVision module installation Preparing the installation niche Mounting Accessories Anti-tipbracketsNow attach the installation niche to the wall Securing an alternative anti-tipdevice Sliding the appliance into the installation niche Aligning the appliance Attaching the appliance to the installation niche Attaching the toe-kickcoverMounting the air separator Plumbing You can now continue with the installation Connecting the water supply Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel Description of function MasterCool control panel options for RemoteVisionStatus indicators SelectablePage Page Page Alteration rights reserved / M.-Nr.09 743 930 /