Roberts Radio RD-12CFM manual Headphone socket, Line out socket, Display backlight

Page 13

Headphone socket

A 3.5mm Headphone Socket located on the right-hand end of you radio is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeaker.

Line out socket

A 3.5mm Line out socket located on the rear of you radio is provided for connecting the audio signal to an external amplifier. Inserting a line out audio cable will not mute the internal loudspeaker. Set the volume control to minimum if desired.

Display backlight

1.The display backlight will be switched on for approximately 12 seconds when any button is pressed.

2.When your radio is powered by AC mains the display backlight will always be switched on.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

12

 

Image 13
Contents RD-12CFM Contents Controls Top Mains operation Battery operationOperating your radio Selecting a station Display modes Secondary servicesAutoselect Finding new stationsSignal strength display Manual TuningClassic FM button Presetting stationsRecalling a preset station System reset Line out socket Headphone socketDisplay backlight General Specifications Circuit FeaturesFuse Mains supplyGuarantee