Roberts Radio RD-12CFM manual Classic FM button, Presetting stations

Page 10

Classic FM button

Your radio is fitted with a button which when pressed will automatically

1

tune your radio to Classic FM.

1.Press the Classic FM button.

2.Your radio will automatically tune to Classic FM.

Note: If Classic FM is not available in your area the display will show "Not Found"

Presetting stations

There are 5 memory presets.

1

 

1.

Press the On/Off button to switch on your radio.

 

2.

Tune to the required station as previously described.

 

3.

Press and hold down the required Preset button until the display

3

 

shows e.g. Preset 1 stored. The station will be stored under the

 

chosen preset button. Repeat this procedure for the remaining presets.

4. Stations stored in preset memories may be overwritten by following the above procedure.

9

Image 10
Contents RD-12CFM Contents Controls Top Battery operation Mains operationOperating your radio Selecting a station Secondary services Display modesFinding new stations AutoselectManual Tuning Signal strength displayPresetting stations Classic FM buttonRecalling a preset station System reset Line out socket Headphone socketDisplay backlight Specifications Circuit Features GeneralMains supply FuseGuarantee